ANALYSIS OF RIVER CLEANING SHIP DESIGN USING THE TRASHER BOAT IDEA USING MAXSURF
-
DOI:
https://doi.org/10.32734/dinamis.v11i1.12486Keywords:
Trasher Boat, MaxsurfAbstract
Ships are a means of transportation for moving materials and goods from one place to another. Along with this increase, it was also followed by the development of other industries so that it had an impact. However, in increasing these activities, in addition to generating benefits, it also creates new impacts through the waste produced. Several work boats are made to solve problems related to the type of work according to needs. The solution that can be used to overcome the accumulation of garbage in the river is to use the help of a Trash Skimmer Boat. This work boat is a type of special ship that is used to carry out waste collection in rivers, lakes, seas and canals. By using the help of Maxsurf Software, the main size is L = 100 cm, B = 30 cm H = 15 cm, T = 3.54 cm with a payload capacity of 3 kg. It has the following data: Displacement = 6,968 kg ; block coefficient (Cb) = 0.387; Prismatic Coef (Cp) = 0.832.
Keyword : Ship, Workboat, Trasher boat, Trash Skimmer Boat
Downloads
References
Hutagaol, N., 2016. PENGEMBANGAN PELABUHAN BELAWAN DAN PENGARUHNYA TERHADAP
KEHIDUPAN SOSIAL EKONOMI MASYARAKAT DELI, 1920-1942. J. Sej. Citra Lekha 1, 40–50.
Manen, J. D., & Oossanen, P. V. (1988). Principles of Naval Architecture. In E. V. Lewis, Principles of Naval
Architecture Second Revision (p. 153). Jersey City: The Society of Naval Architects and Marine Engineers.
Arlius, Farendy. 2014. Tanker 5000 Payload. Rencana garis. Rencana Umum.Skripsi.Surabaya: Institut Teknologi
Sepuluh November
Wulan AN. 2015. TUTORIAL MEMBUAT KAPAL MENGGUNAKAN APLIKASI MAXSURF. Universitas
Brawijaya Malang
Walezyk, S. L. (2016). Patent No. US20060065586A1. United States.
Andriyanto RD, Manfaat D. PENENTUAN UKURAN UTAMA KAPAL OPTIMAL DENGAN METODE BASIS
SHIP MENGGUNAKAN SISTEM KOMPUTER. JURNAL TEKNIK POMITS Vol. 2, No. 1, (2013) ISSN: 2337-3539
(2301-9271 Print)
Karya pemuda mulyo agung, 2017, Jenis-jenis Lambung kapal lengkap dengan pengertiannya
Biro Klasifikasi Indonesia. (2009). Rules for The Classification and Construction of Seagoing Steel Ships, Volume
II Rules for Hull. Jakarta: Biro Klasifikasi Indonesia
Harvald A. A. (1992). Tahanan Dan Propulsi Kapal. Surabaya : Erlangga
Manfaat, D. (2013). Case-Based Design : Desain Berbasis Kasus. Jakarta: Gramedia Pustaka Utama.
Hogben, N and Standing, R (1975), Wave Pattern Resistance Fnom Routine Model Test, Trans. RINA, Vol 117.
Published
Issue
Section
Copyright (c) 2023 DINAMIS
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
