Design and Construction of Sandblasting Tools for Metal Surface Cleaner
DOI:
https://doi.org/10.32734/dinamis.v13i1.21854Abstract
As global technology and industry continue to develop rapidly, the manufacturing industry in Indonesia is also becoming increasingly advanced to keep pace with global industrial progress. A good surface metal is one that is clean from all types of contaminants such as dust, rust, oil, paint, and has a uniform surface roughness. Sandblasting is a method used to remove rust, dirt, and other impurities like oil and paint from metal surfaces. This research aims to design a sandblasting tool using Capstone Design analysis. The process includes selecting the type of sandblasting tool, determining its specifications, and calculating the dimensions of the blasting chamber. Additionally, the study involves assembling the sandblasting chamber, installing the required sandblasting components, as well as testing the functionality of the completed sandblasting system. Based on the functional testing results of the designed sandblasting tool, it can be concluded that the sandblasting tool functioned well and can be used by future researchers. From the roughness test results, it was found that the surface roughness after sandblasting is significantly higher compared to the initial condition.
Downloads
References
. HB, F. Putri, and D. Riawan, “Analisa Pengaruh Sudut dan Waktu Penyemprotan Terhadap Uji Kekasaran Permukaan Material Baja ST 50 pada Proses Sandblasting,” Austenite, vol. 10, no. 2, pp. 51–55, 2018. [Online]. Available: https://doi.org/10.5281/zenodo.4547648
. W. P. Bangun, I. M. Widiyarta, and I. M. Parwata, “Pengaruh Waktu dan Ukuran Partikel Dry Sandblasting terhadap Kekasaran Permukaan pada Baja Karbon Sedang,” Jurnal Ilmiah Universitas Udayana Bali, 2017.
. F. Ishaka, “Pengaruh Ukuran Pasir pada Perlakuan Sandblasting yang Memanfaatkan Pasir Besi Terhadap Wettability Baja Tahan Karat 316L,” Undergraduate thesis, Institut Teknologi Nasional Malang, 2020.
. K. Adhikari, J. Baria, S. Bari, S. Sayyed, and S. Shaikh, "Portable Sandblasting Machine," International Journal for Research in Applied Science & Engineering Technology (IJRASET), vol. 9, no. V, pp. 812–817, May 2021. [Online]. Available: https://doi.org/10.22214/ijraset.2021.34294.
. Qomariah and T. Rochman, "On the Review of Utilization of Sandblasting Waste in Concrete: Cracks Propagation and SEM Results," Civil Engineering and Architecture, vol. 11, no. 1, pp. 101–113, 2022. [Online]. Available: http://www.hrpub.org. DOI: 10.13189/cea.2023.110109.
. Susetyo, “Pemanfaatan Pasir Volkano Lumajang sebagai Alternatif Abrasif di Galangan Kapal,” 2010.
. E. Sulistyo and P. H. Setyorini, “Pengaruh Waktu dan Sudut Penyemprotan pada Proses Sand Blasting terhadap Laju Korosi Hasil Pengecatan Baja AISI 430,” Rekayasa Mesin, vol. 2, no. 3, pp. 205–208, 2012.
. D. S. Aditama, “Pengaruh Jarak dan Sudut Dry Sandblasting terhadap Kekasaran Permukaan pada Baja Karbon Sedang,” Undergraduate thesis, Universitas Udayana, 2015.
. H. Anar, Parameter dalam Perancangan Arsitektur, Depok: Universitas Indonesia, 2012.
. J. Anthony, S. Warwood, K. Fernandez, and H. Rowland, “Process Optimization using Taguchi Method of Experimental Design,” Work Study, vol. 50, 2001.
. D. P. Apriwandani, “Pengaruh Daya Rekat Coating terhadap Flash Rust (SSPC-VIS5) dengan Surface Preparation Wet Abrasive Blasting,” Undergraduate thesis, Universitas Muhammadiyah Malang, 2018.
. F. P. Wise, V. Naubnome, and N. Fauzi, “Design Get Up Tool Sandblasting as Cleaner Dirt on Surface Metal,” Dynamics: Journal Scientific Technique Machine, 2021.
. G. Batis, N. Kouloumbi, and E. Soulis, “Sandblasting: The Only Way to Eliminate Rust,” Anti-Corrosion Methods and Materials, vol. 45, no. 4, pp. 222–226, 1998.
. S. Erwin and H. S. Putu, “Waktu dan Sudut Penyemprotan pada Proses Sandblasting terhadap Laju Korosi Hasil Pengecatan Baja AISI 430,” 2011.
. D. Fadilah, “Rancang Bangun Portable Smoke Particulate Collector Berbasis Thermophoretic Force,” Undergraduate thesis, Universitas Indonesia, 2009.
. V. Gane, “Parametric Design – Paradigm Shifts?,” M.A. thesis, Massachusetts Institute of Technology, 2004.
. R. Rosidah, S. Ardila, K. Sidi, D. Pranowo, and D. Kurniasih, “Analisis Kekasaran Permukaan pada Proses Sandblasting dengan Variasi Jarak, Tekanan, dan Sudut pada Pelat A36 Menggunakan Metode Box Behnken,” Jurnal Ilmiah Politeknik Perkapalan Surabaya, 2014.
. Sugiyono, Metode Penelitian Pendidikan: Pendekatan Kuantitatif, Kualitatif, dan R&D, Bandung: Alfabeta, 2015.
. B. Utomo, S. Sugeng, S. Sulaiman, and A. Windyandari, “Aplikasi Teknik Pembersihan Plat Baja Karbon pada Lambung Kapal dengan Metode Sandblasting,” Jurnal Pengabdian Vokasi, vol. 1, no. 2, 2019.
. X. Yu, X. Wei, X. Huang, and L. Zhang, “Study on the Modeling Method and Influencing Parameters of Sandblasting Process for Blade Grinding,” School of Mechanical Engineering, Shandong University of Technology, China, 2022.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 DINAMIS

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.