The Design of DC 12 V to DC 380 V 1000 Watt Converter with ATmega328 as a 65 KHz Oscillator
DOI:
https://doi.org/10.32734/jotp.v2i2.5409Keywords:
transformer, microcontroller, DC-DC converterAbstract
A DC to DC converter has been built and research has been conducted to examine the effect of load on the output voltage of the DC to DC converter with fixed oscillation frequency. This converter DC to DC circuit uses a 12 V DC battery as an input voltage source connected with a step-up transformer until it is successfully raised to 380 V DC. The load given to the DC to DC circuit converter in the form of lamps, varies from 40 watts to 960 watts with a fixed oscillation frequency of 65 Khz that has been determined by the microcontroller. The test results showed that the output voltage value decreased in accordance with the increase in load so that when the load of 960 watts obtained the output voltage of 220 V DC.
Downloads
Published
Issue
Section
Copyright (c) 2020 Journal of Technomaterial Physics
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Abdimas TALENTA as well as TALENTA Publisher Universitas Sumatera Utara as the publisher of the journal.
Copyright encompasses exclusive rights to reproduce and deliver the article in all forms and media. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, will be allowed only with written permission from Jurnal Abdimas TALENTA.
The Copyright Transfer Form can be downloaded here.
The copyright form should be signed originally and sent to the Editorial Office in the form of original mail or scanned document.
