Automatic Aquarium Cleaner and Fish Feeder Based on Microcontroller Atmega8535
DOI:
https://doi.org/10.32734/jotp.v3i2.6157Abstract
The design of an aquarium cleaner and automatic fish feeder based on the
Atmega8535 microcontroller has been successfully carried out. Testing is carried out after
all components are integrated into one including the overall program that has been made.
Testing is done by running the system according to the procedure and observing the
system's performance, starting with measuring turbidity and checking the water
replacement schedule. The work processes running on the system are analyzed after testing.
When the water turbidity level is high, the drain pump will activate and pump water out of
the aquarium. After the remaining water level is about 25%, the drain pump will stop, and
the filling pump will be active. The fill pump runs until the water level reaches 100% and
then shuts down. After 10 minutes of filling the water, the servo motor will move and drop
the fish feed into the aquarium.
Downloads
Published
Issue
Section
Copyright (c) 2021 Journal of Technomaterial Physics
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Abdimas TALENTA as well as TALENTA Publisher Universitas Sumatera Utara as the publisher of the journal.
Copyright encompasses exclusive rights to reproduce and deliver the article in all forms and media. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, will be allowed only with written permission from Jurnal Abdimas TALENTA.
The Copyright Transfer Form can be downloaded here.
The copyright form should be signed originally and sent to the Editorial Office in the form of original mail or scanned document.
