Machine Optimization of SNK HF Fabrication Plant in PT. Komatsu Indonesia with FMEA Method and Overall Equipment Effectiveness (OEE)
DOI:
https://doi.org/10.32734/jotp.v3i2.6635Abstract
The effectiveness of a machine is an important thing in the production process; the losses that arise can cause time losses and hamper the process, especially in vital production facilities. The SNK HF machine is a machine with category A or critical with the highest damage occurring throughout 2019–2020. Analysis of the condition of the machine’s effectiveness in this study was done by using the overall equipment effectiveness (OEE) method, namely by knowing the conditions of availability, performance and quality. The results of the OEE analysis are followed by a failure mode effect analysis (FMEA) to overcome the problems that occur. The condition of machine damage and the availability of machine parts are the factors that most affect the decrease in the effectiveness of the SNK HF machine.
Downloads
Published
Issue
Section
Copyright (c) 2021 Journal of Technomaterial Physics
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Abdimas TALENTA as well as TALENTA Publisher Universitas Sumatera Utara as the publisher of the journal.
Copyright encompasses exclusive rights to reproduce and deliver the article in all forms and media. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, will be allowed only with written permission from Jurnal Abdimas TALENTA.
The Copyright Transfer Form can be downloaded here.
The copyright form should be signed originally and sent to the Editorial Office in the form of original mail or scanned document.
