Nanocellulose in Cementitious Composites: Rheology, Buildability, Interlayer Bonding, and Mechanical Performance — A Systematic Literature Review

Agung Prabowo; Tegar Abdillah Ramadhan; Ibnu Eka Rahayu

doi:10.32734/jcnar.v8i1.27151

Authors

Agung Prabowo Chemical Engineering Department, Politeknik Negeri Samarinda, Samarinda, 75131, Indonesia
Tegar Abdillah Ramadhan Civil Engineering Department, Politeknik Negeri Samarinda, Samarinda, 75131, Indonesia
Ibnu Eka Rahayu Chemical Engineering Department, Politeknik Negeri Samarinda, Samarinda, 75131, Indonesia

DOI:

https://doi.org/10.32734/jcnar.v8i1.27151

Keywords:

Nanocellulose, Cellulose Nanocrystals, Cellulose Nanofibers, Cementitious Composites, Rheology

Abstract

Nanocellulose, comprising cellulose nanocrystals (CNC), cellulose nanofibers (CNF), and bacterial nanocellulose, is gaining attention as a bio-based additive for modifying the fresh- and hardened-state behaviour of cementitious composites, yet the evidence remains scattered across cement paste, mortar, geopolymer, ultra-high-performance concrete (UHPC), and 3D-printed systems. This systematic review synthesises available evidence on nanocellulose-modified cementitious composites, focusing on rheology, buildability, interlayer bonding, and mechanical performance. Following the PRISMA 2020 guideline, a search of the ScienceDirect database identified 127 records, of which 37 met the eligibility criteria: primary, English-language, peer-reviewed articles reporting nanocellulose incorporation into a cementitious or geopolymer binder with at least one of the four target outcomes measured. Data on nanocellulose type and dosage, binder system, and reported outcomes were extracted and synthesised narratively. Low-dosage CNC and CNF additions (typically below 0.5 wt% of binder) were consistently associated with increased yield stress and viscosity, delayed or modified hydration, and higher early-age compressive and flexural strength, attributable to internal curing, nucleation, and nanoscale reinforcement; excessive dosages tended to cause agglomeration and porosity increases that offset these gains. Studies addressing buildability and interlayer bonding directly, mostly concerning 3D-printed systems, were comparatively few. The certainty of evidence is limited by heterogeneity in nanocellulose source, dosage, and testing protocol, by reliance on laboratory-scale specimens, and by the restriction of the search to a single database. Nanocellulose is a viable rheology-modifying and strength-enhancing additive for cementitious systems, and dosage optimisation and standardised testing protocols remain priorities for future research. The evidence base is markedly uneven across outcomes (mechanical performance, 35 of 37 studies; rheology, 12; buildability, 6; interlayer bonding, 2), and screening and appraisal relied on titles, abstracts and metadata rather than full-text articles, which the Discussion identifies as the principal limitations on the certainty of these conclusions.

Downloads

Download data is not yet available.

References

[1] Al-Askary ASJ, Kopecskó K, Oktay D. Cellulose nanocrystals and their utilization in cement-based composites: A comprehensive review. Case Studies in Construction Materials. 2025;23:e05550. https://doi.org/10.1016/j.cscm.2025.e05550

[2] Jin P, Hasany M, Kohestanian M, Mehrali M. Micro/nano additives in 3D printing concrete. Cement and Concrete Composites. 2025;155:105799. https://doi.org/10.1016/j.cemconcomp.2024.105799

[3] Hamada HM, Shi J, Al Jawahery MS, Majdi A, Yousif ST, Kaplan G. Application of natural fibres in cement concrete: A critical review. Materials Today Communications. 2023;35:105833. https://doi.org/10.1016/j.mtcomm.2023.105833

[4] Page MJ, McKenzie JE, Bossuyt PM, Boutron I, Hoffmann TC, Mulrow CD, et al. The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. BMJ. 2021;372:n71. https://doi.org/10.1136/bmj.n71

[5] Hong QN, Fàbregues S, Bartlett G, Boardman F, Cargo M, Dagenais P, Gagnon M-P, Griffiths F, Nicolau B, O'Cathain A, Rousseau M-C, Vedel I, Pluye P. The Mixed Methods Appraisal Tool (MMAT) version 2018 for information professionals and researchers. Education for Information. 2018;34(4):285-291. https://doi.org/10.3233/EFI-180221

[6] Kaur H, Orasutthikul S, Jongvivatsakul P, Nair SD, Sathidvongkun P, Hashimoto K. Effect of optimized dosage and curing conditions on the performance enhancement of cementitious composites using bacterial cellulose. Construction and Building Materials. 2025;472:140950. https://doi.org/10.1016/j.conbuildmat.2025.140950

[7] Lu Q, Sha A, Chen Y, Li M, Liu Z, Jiao W. Influence of CNC modification and CO2 curing on the macroscopic, microstructural, and durability properties of foamed concrete grouts. Journal of Building Engineering. 2026;128:116490. https://doi.org/10.1016/j.jobe.2026.116490

[8] Zhang S, Wang Q, Zhou W, Chang X, Zhang Z, Jiang Z, Zheng Q. Multiscale enhancement mechanisms of engineered geopolymer composites incorporating in-situ cellulose nanofibers: From matrix to fiber-matrix interface. Cement and Concrete Composites. 2026;171:106624. https://doi.org/10.1016/j.cemconcomp.2026.106624

[9] Liu J, Li Y, Du X, Lin H, Zang Y. Effect and mechanism analysis of NCC on mechanical and shrinkage properties of cement paste under low atmospheric pressure and low humidity. Construction and Building Materials. 2025;494:143459. https://doi.org/10.1016/j.conbuildmat.2025.143459

[10] Jaha N, Bao Y, Meng W. Dual template directed C-S-H mineralization enables lightweight, strong, and ductile cementitious composites. Cement and Concrete Composites. 2026;174:106802. https://doi.org/10.1016/j.cemconcomp.2026.106802

[11] Haj Fattouh I, Salim MH, Dali MHA, Tardy BL, Kim TY. Cellulose and chitin nanofibers from food waste for reinforcing cementitious composites. Journal of Building Engineering. 2026;127:116410. https://doi.org/10.1016/j.jobe.2026.116410

[12] Rajendran N, Runge T, Bergman R, Nepal P, Ali SD, Fahim AA, Moradllo MK. Economic and environmental impact analysis of cellulose nanocrystal-reinforced cementitious mixture in 3D printing. Resources, Conservation and Recycling. 2025;218:108252. https://doi.org/10.1016/j.resconrec.2025.108252

[13] Rahmawati C, Faisal M, Roslidar, Fitriani, Ahmad J, Muliana I. Extraction and characterization of nanocellulose from bemban fibre for cement-based composite. Case Studies in Construction Materials. 2025;22:e04100. https://doi.org/10.1016/j.cscm.2024.e04100

[14] Fan L, Wu C, Zheng J, Song F, Wang H, Li F. Mechanical properties and micro-mechanism of cement-based materials strengthened by organic-inorganic synergistic effects of cellulose nanofibers and graphene oxide. Construction and Building Materials. 2025;476:141296. https://doi.org/10.1016/j.conbuildmat.2025.141296

[15] Salifu N, Bassuoni M, Guven G. Performance evaluation of limestone-blended cement and cellulose nanomaterials in 3D concrete printing. Case Studies in Construction Materials. 2025;22:e04758. https://doi.org/10.1016/j.cscm.2025.e04758

[16] de Souza LO, de Souza LMS, Silva FdA, Mechtcherine V. Rheological characterization of cement pastes with microcrystalline and nano-fibrillated cellulose under static and dynamic regimes. Cement and Concrete Composites. 2023;142:105219. https://doi.org/10.1016/j.cemconcomp.2023.105219

[17] Zhang L, Chen Y, Liu Z, Yu Q. Enhancing geopolymer stiffness via in-situ seed-mediated growth of LDHs on cellulose nanofibrils. Cement and Concrete Research. 2026;205:108238. https://doi.org/10.1016/j.cemconres.2026.108238

[18] Pan M, Yang S, Li X, Ma C, Ma G, Wang L, Wang Q. Synergistically toughening 3D-printed concrete performance via self-assembled dual organic network. Construction and Building Materials. 2026;535:146927. https://doi.org/10.1016/j.conbuildmat.2026.146927

[19] Soares TV, Effting C, Miranda KW, Schackow A. Application of bacterial nanofibrillated cellulose for performance improvement in vermiculite lightweight mortar. Construction and Building Materials. 2024;449:138474. https://doi.org/10.1016/j.conbuildmat.2024.138474

[20] dos Reis RR, Effting C, Schackow A. Cellulose nanofibrils on lightweight mortars for improvement of the performance of cement systems. Carbohydrate Polymer Technologies and Applications. 2023;5:100303. https://doi.org/10.1016/j.carpta.2023.100303

[21] Zhu S, Luo L, Qin Y, Li Y. Study on the effect of cellulose nanocrystals on the pore structure and drying shrinkage of alkali-activated recycled ultra-high performance concrete: A multifractal theory. Construction and Building Materials. 2025;463:140113. https://doi.org/10.1016/j.conbuildmat.2025.140113

[22] Safanelli N, Schackow A, Effting C, de Matos PR. The effect of crystalline nanocellulose on the rheology, hydration of cement pastes, and buildability of 3D-printed concrete. Journal of Building Engineering. 2025;113:114000. https://doi.org/10.1016/j.jobe.2025.114000

[23] Guo A, Geng Y, Ma H, Gao D, Feng H, Zhang Y, Hao F, Yu Z, Sun Z. Hydration kinetics and mechanism of cement pastes with PEGylated cellulose nanocrystals. Construction and Building Materials. 2026;508:145130. https://doi.org/10.1016/j.conbuildmat.2026.145130

[24] Fahim AA, Bukhari SJS, Khanzadeh Moradllo M. Additive manufacturing of carbonatable ternary cementitious systems with cellulose nanocrystals. Construction and Building Materials. 2025;495:143753. https://doi.org/10.1016/j.conbuildmat.2025.143753

[25] Zaoui A, Ben Rejeb Z, Kwon OS, Park CB. Fine-tuning the microstructure of concrete composite: Impact of surface-coated nanocellulose on the increase of strength and decrease of strength variation in concrete. Construction and Building Materials. 2025;484:141620. https://doi.org/10.1016/j.conbuildmat.2025.141620

[26] Fan Q, Meng D, Wu H, Zheng Y, Jiao Y. Wettability driven nano-modification of engineered cementitious composites for enhanced sulfate resistance by cellulose nanocrystals. Construction and Building Materials. 2025;504:144593. https://doi.org/10.1016/j.conbuildmat.2025.144593

[27] Fan L, Wu C, Zheng J, Song F, Wang H, Li F. Cement-based nanocomposites: The synergic effect of graphene oxide and cellulose nanofibers on microstructural features and mechanical performance. Diamond and Related Materials. 2025;158:112609. https://doi.org/10.1016/j.diamond.2025.112609

[28] Zhu S, Luo L, Qin Y, Zheng T, Cheng J, Tian J. Study on the early performance of alkali-activated slag-fly ash binders incorporating cellulose nanocrystals. Case Studies in Construction Materials. 2025;22:e04498. https://doi.org/10.1016/j.cscm.2025.e04498

[29] Du J, Wang Y, Guo P, Meng W. Tailoring of steel fiber surface by coating cellulose nanocrystal for enhanced flexural properties of UHPC. Cement and Concrete Composites. 2024;154:105773. https://doi.org/10.1016/j.cemconcomp.2024.105773

[30] Rajendran N, Runge T, Bergman RD, Nepal P, Nair N, Ashraf W. Economic and environmental impact analysis of cellulose nanofiber-reinforced concrete mixture production. Resources, Conservation and Recycling. 2025;212:107917. https://doi.org/10.1016/j.resconrec.2024.107917

[31] Wu J, Guo Y, Huang G, Yang J, Lu Q, Yao C, Ren G, Shen A. Green empowerment of ultra-high-performance concrete: reinforcement effects and multi-scale mechanisms of cellulose nanofibers and cellulose nanocrystals. Construction and Building Materials. 2026;514:145548. https://doi.org/10.1016/j.conbuildmat.2026.145548

[32] Feng H, Zheng Z, Guo A, Sun Z, Yu Z, Yao C, Du Y. Mechanical properties and microstructure of cellulose nanocrystal modified cement pastes subject to chloride erosion. Journal of Building Engineering. 2025;107:112670. https://doi.org/10.1016/j.jobe.2025.112670

[33] Liu Q, Cao Z, Liu Z, Sun X, Zhou Z. Tuning characteristics of nanocellulose and its effects on the strength development and microstruture evolution of cement pastes. Construction and Building Materials. 2026;538:147280. https://doi.org/10.1016/j.conbuildmat.2026.147280

[34] De La Rosa Á, Ruiz G, Husillos-Rodríguez N, Moreno R. Effect of cellulose nanofibers on the rheological and mechanical properties of cement pastes with metakaolin and natural volcanic pozzolan. Construction and Building Materials. 2024;452:138823. https://doi.org/10.1016/j.conbuildmat.2024.138823

[35] Shen J, Li Y, Lin H, Liu J, Li Y, Sun J. Research on the performance and mechanism of carboxylated cellulose nanofiber modified alkali-activated ultra-high performance concrete matrix. Construction and Building Materials. 2026;515:145656. https://doi.org/10.1016/j.conbuildmat.2026.145656

[36] Feng H, Su Y, Guo A, Yu Z, Guo Z. Mechanical properties of cellulose nanocrystal modified cement/fly ash pastes under various water/binder ratios. Construction and Building Materials. 2024;447:138213. https://doi.org/10.1016/j.conbuildmat.2024.138213

[37] Lee YK, Kim JH, Chung CW. A synergistic combination of cellulose nanocrystal and graphene oxide for cementitious materials. Construction and Building Materials. 2026;527:146418. https://doi.org/10.1016/j.conbuildmat.2026.146418

[38] Fahim AA, Admassu N, Dailey G, Khanzadeh Moradllo M. Application of cellulose nanocrystals in 3D printed alkali-activated cementitious composites. Journal of Building Engineering. 2024;82:108380. https://doi.org/10.1016/j.jobe.2023.108380

[39] Alfarra J, Wegner LD, Boulfiza M. Effects of antifreeze admixtures on masonry performance at subfreezing temperatures. Canadian Journal of Civil Engineering. 2024;52:738. https://doi.org/10.1139/cjce-2024-0294

[40] Wu J, Guo Y, Yang J, Lu Q, Jiang P, Yao C, Shen A. Multi-scale enhancement of UHPC by cellulose nanocrystals and reduced-content steel fibers: from micro-mechanisms to macro-properties. Journal of Building Engineering. 2025;116:114703. https://doi.org/10.1016/j.jobe.2025.114703

[41] Kilic U, Soliman N, Omran A, Ozbulut OE. Effects of cellulose nanofibrils on rheological and mechanical properties of 3D printable cement composites. Cement and Concrete Composites. 2024;152:105617. https://doi.org/10.1016/j.cemconcomp.2024.105617

[42] Zhou H, Zheng S, Li H, Ran Q, Ma J. Hydrothermal synthesis of C-S-H/cellulose nanocomposites and its enhancement effect on the mechanical performance of cement-based materials. Journal of Building Engineering. 2025;102:112014. https://doi.org/10.1016/j.jobe.2025.112014

[43] Garritty C, Gartlehner G, Nussbaumer-Streit B, King VJ, Hamel C, Kamel C, Affengruber L, Stevens A. Cochrane Rapid Reviews Methods Group offers evidence-informed guidance to conduct rapid reviews. Journal of Clinical Epidemiology. 2021;130:13-22. https://doi.org/10.1016/j.jclinepi.2020.10.007