Pemanfaatan Sampah Plastik Multilayer, Styrofoam dan Oli Bekas untuk Pembuatan Paving Block
DOI:
https://doi.org/10.32734/jtk.v14i1.13604Keywords:
multilayer plastic, styrofoam, paving blockAbstract
Plastic is an essential material in our daily lives. This study identifies that among various types of waste, multilayer plastic and styrofoam are one of the most difficult to manage optimally. One alternative to reduce this problem is to use waste as a mixture material for paving blocks. The composition of multilayer plastic and styrofoam used in this study were 65%:35%, 55%:45%, 45%:55%, and 35%:65%.This research only produced paving block samples that passed the visual test, size test, and average water absorption test. However, none of the samples passed the compressive strength, abrasion resistance, and sodium sulfate resistance tests according to the SNI 03-0691-1996 standards. Meanwhile, the water absorption test results for the 65%:35% and 55%:45% multilayer plastic-styrofoam samples met the quality standard C (for pedestrian use), while the 45%:55% and 35%:65% samples met the quality standard B (for parking equipment use).
Downloads
References
S. Rahma, A. N. Nurhakim, U. Hadiyawati, and N. V. Hidayati, “Komposisi dan Distribusi Sampah Makro dan Meso di Sungai Keruh, Bumiayu, Kabupaten Brebes,” J. Perikan. dan Kelaut., vol. 12, no. 2, pp. 118–131, 2022.
R. E. Harahap, “Pembuatan Paving Block dengan Memanfaatkan Limbah Plastik Jenis Styrofoam (Polystyrene),” Universitas Muhammadiyah Sumatra Utara, 2021.
V. L. Riyandini, W. Fitrada, and H. Sawir, “Pengaruh Komposisi Plastik Multilayer dan Plastik HDPE terhadap Sifat Fisik Papan Polimer,” J. Sains dan Teknol. J. Keilmuan dan Apl. Teknol. Ind., vol. 21, no. 2, pp. 156–162, 2021, doi: 10.36275/stsp.v21i2.385.
Priyadi and N. Diah, “Pengaruh Penambahan Sampah Plastik dan Limbah Styrofoam terhadap Ampuh Press Bata Beton,” in Prosiding Konferensi Internasional, 2021, vol. 521, pp. 212–215.
M. Hasbi, L. Laome, P. Aksar, and L. A. Darsono, “Pemanfaatan Minyak Oli Bekas sebagai Bahan Bakar Alternatif,” in Seminar Nasional Teknologi Terapan Inovasi dan Rekayasa (SNT2IR), 2019, pp. 355–360.
D. Enda, M. Sastra, Lizar, Zulkarnain, and B. Rahman, “Penggunaan Plastik Tipe Pet sebagai Pengganti Semen pada Pembuatan Paving Block,” Inovtek Polbeng, vol. 9, no. 2, pp. 214–218, 2019, doi: 10.35314/ip.v9i2.1010.
Sudarno, S. Nicolaas, and V. Assa, “Pemanfaatan Limbah Plastik untuk Pembuatan Paving block,” J. Tek. Sipil Terap., vol. 3, no. 2, pp. 101–110, 2021.
Anonim, “Cetakan Paving Block Segi Enam,” lazada.co.id, 2023. https://www.lazada.co.id/tag/cetakan-konblok-segi-6/ (accessed Jan. 01, 2023).
R. . Harahap, A. M. Siregar, F. Zulkarnain, and Affandi, “Pemanfaatan Limbah Plastik Jenis Styrofoam untuk Pembuatan Paving Block,” J. Rekayasa Mater. Manufaktur dan Energi, vol. 5, no. 2, pp. 121–127, 2022, doi: https://doi.org/10.30596/rmme.v5i2.12390.
B. Soebandono, A. Pujianto, and D. Kurniawan, “Perilaku Kuat Tekan dan Kuat Tarik Beton Campuran Limbah Plastik HDPE,” Semesta Tek., vol. 16, no. 1, pp. 76–82, 2015, doi: 10.18196/st.v16i1.435.
Abdulhalim, Riman, D. Irawan, and M. Cakrawala, “Pemanfaatan Limbah Styrofoam dalam Pembuatan Material Dinding Bangunan,” J. Widya Tek., vol. 23, no. 2, pp. 1–5, 2015.
A. Ginting, “Kuat Tekan dan Porositas Beton Porous dengan Bahan Pengisi Styrofoam,” J. Tek. Sipil, vol. 11, no. 2, pp. 76–98, 2019, doi: 10.28932/jts.v11i2.1404.
B. A. Urbania, T. U. Dewi, and A. Nindyapuspa, “Pengaruh Metode Perawatan Siram terhadap Kualitas Paving Block menggunakan Limbah Plastik HDPE – LDPE,” in Conference Proceeding on Waste Treatment Technology, 2022, vol. 5, no. 1, pp. 102–106.
H. Winarno and R. Pujantara, “Pengaruh Komposisi Bahan Pengisi Styrofoam pada Pembuatan Batako Mortar Semen Ditinjau dari Karakteristik dan Kuat Tekan,” J. Sci. PINISI, vol. 1, no. 1, pp. 1–12, 2015.
F. Syefringga, “Pengaruh Penambahan Limbah Cangkang Kerang sebagai Campuran terhadap Kuat Tekan dan Daya Serap Air pada Paving Block,” Universitas Islam Riau, Pekanbaru, 2020.
M. S. Dewi and A. Mahyudin, “Analisis Sifat Fisis dan Ketahanan Atas Natrium Sulfat Paving Block dengan Variasi Serbuk Cangkang Langkitang ( Faunus ater ) dan Penambahan Serat Ijuk ( Arrenge pinnata ),” J. Fis. Unand, vol. 7, no. 4, pp. 339–345, 2018.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Jurnal Teknik Kimia USU
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
