Pengaruh Penambahan Selulosa Pelepah Sawit dan Konsentrasi Gliserol dalam Pembuatan Bioplastik dari Pati Singkong

Mochamad Mizan Yusridarmawan; Maria Ulfah; Reza Widyasaputra

doi:10.32734/jtk.v15i2.26803

Authors

Mochamad Mizan Yusridarmawan Institut Pertanian STIPER Yogyakarta
Maria Ulfah Institut Pertanian STIPER Yogyakarta
Reza Widyasaputra Institut Pertanian STIPER Yogyakarta

DOI:

https://doi.org/10.32734/jtk.v15i2.26803

Keywords:

bioplastics, glycerol, cassava starch, palm fronds, cellulose

Abstract

Bioplastics are one of the alternatives to conventional plastic that is more environmentally friendly because they can be degraded naturally with the help of microorganisms. This study aims to determine the effect of the addition of cellulose in palm fronds and glycerol concentration on the characteristics of bioplastics made from cassava starch. This study used a factorial Completely Randomized Design (CRD) with two factors: cellulose addition (2, 3, and 4 g) and glycerol (2, 3, and 4 mL), with two replications. The characteristics of bioplastics observed include tensile strength, elongation, water absorption, biodegradability, and preference tests. The results showed that the addition of cellulose, glycerol, and the interaction of the two had no significant effect (P>0.05) on all observed parameters.

Downloads

Download data is not yet available.

References

[1] E. Kamsiati, H. Herawati, and E. Y. Purwani, “Potensi pengembangan plastik biodegradable berbasis pati sagu dan ubi kayu di Indonesia,” J. Litbang Pertan., vol. 36, no. 2, pp. 67–76, 2017.

[2] B. A. Widyaningrum et al., “Karakteristik sifat mekanik bioplastik pati singkong/pva dengan penambahan pulp tandan kosong kelapa sawit dan asam sitrat teraktivasi,” J. Kim. dan Kemasan, vol. 42, no. 2, pp. 46–51, 2020.

[3] S. Intandiana, A. H. Dawam, Y. R. Denny, R. F. Septiyanto, and I. Affifah, “Pengaruh karakteristik bioplastik pati singkong dan selulosa mikrokristalin terhadap sifat mekanik dan hidrofobisitas,” EduChemia (Jurnal Kim. dan Pendidikan), vol. 4, no. 2, pp. 185–190, 2019.

[4] R. L. Permadani and S. Silvia, “Sintesis bioplastik dari selulosa asetat tandan kosong kelapa sawit: sebuah kajian,” J. Integr. Proses, vol. 11, no. 2, p. 47, 2022.

[5] Y. Brahmana, M. H. Ginting, and I. U. P. Rangkuti, “Bioplastik bersumber bahan selulosa tandan kosong (tkks) dan pelepah kelapa sawit (pks),” J. Agro Fabr., vol. 3, no. 1, pp. 1–8, 2021.

[6] E. Permana, D. R. Gusti, I. L. Tarigan, Y. Andika, and A. C. Nirwana, “Sifat fisik bioplastik dari pati umbi gadung dan pelepah sawit,” Sci. TECH J. Ilmu Pengetah. dan Teknol., vol. 7, no. 1, pp. 45–54, 2021.

[7] A. R. Amalia, R. F. Kumara, and N. P. Putri, “Manufacturing of bioplastics from cellulose empty fruit bunches waste with addition of glycerol as plasticizer,” Konversi, vol. 8, no. 2, pp. 63–68, 2019.

[8] D. P. Dewanti, “Potensi selulosa dari limbah tandan kosong kelapa sawit untuk bahan baku bioplastik ramah lingkungan,” J. Teknol. Lingkung., vol. 19, no. 1, pp. 81–88, 2018.

[9] A. Ramadhan, D. Wardana, R. Rahayu, V. Fadhilla, Y. S. Manalu, and E. Eddiyanto, “Karakterisasi bioplastik dari pelepah kelapa sawit dengan penambahan variasi perbandingan maizena dan gliserin,” Einstein E-Journal, vol. 5, no. 2, 2018.

[10] Safiah, “Plastik biodegradable bahan dasar pati singkong (manihot esculenta) dengan campuran selulosa,” JITU ( J. Ilm. Tek. UNIDA ), vol. 4, no. 1, pp. 113–118, 2023.

[11] C. T. Farida, “Pembuatan plastik biodegradable berbahan dasar selulosa dari tandan kosong kelapa sawit (tkks) dengan penambahan pati sagu,” Universitas Malikussaleh, 2024.

[12] Suherman, H. Moraidah, R. Ariandi, and Ilmi, “Pengaruh suhu aktivasi terhadap karakteristik dan mikrostruktur karbon aktif pelepah kelapa sawit (Elaeis guineensis),” J. Ind. Has. Perkeb., vol. 16, no. 1, pp. 1–9, 2021.

[13] D. Nurulhasani and Suparno, “Home made bioplastik dengan analisis pengaruh rasio gliserol dan selulosa terhadap kekuatan tarik, elongation, dan ketebalan,” J. Sains dan Teknol., vol. 12, no. 1, pp. 56–64, 2023.

[14] Muhammad, R. Ridara, and Masrullita, “Sintesis bioplastik dari pati biji alpukat dengan bahan pengisi kitosan,” J. Teknol. Kim. Unimal, vol. 9, no. 2, pp. 1–11, 2020.

[15] A. Sugiharto, A. Syarifa, N. Handayani, and R. M. Y. P, “Effect of chitosan, clay, and CMC on physicochemical properties of bioplastic from banana corm with glycerol,” J. Bahan Alam Terbarukan, vol. 10, no. 1, pp. 31–35, 2021.

[16] T. F. Anggraini, Y. P. Pratama, and R. N. Kartika, “Pengembangan bioplastik dari limbah pelepah bambu dengan uji biodegradable,” J. Teknol. Kim. Unimal, vol. 14, no. 1, pp. 111–117, 2025.