Determination of Level of Ag, Cu, and Fe in the Mineral Rock Coming from Jambu Dolok Hamlet Toba Samosir District
DOI:
https://doi.org/10.32734/jcnar.v3i2.9355Keywords:
Mineral, Rock, Ag, Cu, Fe, AASAbstract
A study on the determination of Ag, Cu, and Fe contents in mineral rocks has been conducted. The sample was randomly taken from the surface of the hill at Dusun Jambu Dolok Kabupaten Toba Samosir. Ovens destroyed the sample at 900°C. For the determination of Ag and Cu, the sample was dissolved by using concentrated HNO3. For the determination of Fe, it was dissolved by using concentrated HNO3 and concentrated HCl. The determination of Ag, Cu, and Fe was carried out using Atomic Absorption Spectrophotometer. The wavelength is 328.1 nm for Ag, 324.7 nm for Cu, and 248.3 nm for Fe. The results obtained show that the content of Ag, Cu, and Fe in the sample are 2.1590 mg/Kg, 21,311.4754 mg/Kg, and 150,000.0000 mg/Kg, respectively
Downloads
References
Greenberg, A.E. 1985. Standards Methods for The Examination of Water and wastewater. Sixteenth edition. Washington DC: American Public Health Association.
Hartosuwarno, S. 2011. Endapan Mineral. Yogyakarta: Fakultas Teknik Mineral Universitas Pembangunan Nasional “Veteran”.o
Sitorus, D. 2012. Toba Samosir dalam Angka. Balige: BPS Kab. Toba Samosir.
Smith, A. 2001. Pustaka Sains Material. London: Usborne Publishing Ltd.
Vogel. 1991. Buku Teks Kimia Analisis Kuantitatif Anorganik. Jakarta: Penerbit Buku Kedokteran EGC.
Vogel. 1985. Buku Teks Analisis Anorganik Kualitatif makro dan Semimikro. Jakarta: PT Kalman Media Pustaka.
Published
Issue
Section
Copyright (c) 2022 Journal of Chemical Natural Resources
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.