Investigation of the Effect of 60% of the Addition of Latex on Asphalt Pen 60-70
DOI:
https://doi.org/10.32734/jotp.v2i2.5403Keywords:
asphalt, latex, penetrationAbstract
This study discussed the increase of latex 60% addition to obtain the standard of asphalt 60-70. The comparison used were without the increase of latex addition (L0), 1000 g penetration of asphalt 60-70 with 100 g latex with 60 % degree or 10 phr ( L1), 1000 g penetration of asphalt 60-70 with 200 g latex 60 % degree or 20 phr ( L2), 1000 g penetration of asphalt 60-70 with 300 g latex 60 % degree or 30 phr ( L3), 1000 g penetration of asphalt 60-70 with 400 g latex 60 % degree or 40 phr ( L4). All of the samples homogenized by heating at 150ºC temperature and 250 rpm within 30 minutes then soaked in the tub for 30 minutes at 25ºC.
Downloads
Published
Issue
Section
Copyright (c) 2020 Journal of Technomaterial Physics
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Abdimas TALENTA as well as TALENTA Publisher Universitas Sumatera Utara as the publisher of the journal.
Copyright encompasses exclusive rights to reproduce and deliver the article in all forms and media. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, will be allowed only with written permission from Jurnal Abdimas TALENTA.
The Copyright Transfer Form can be downloaded here.
The copyright form should be signed originally and sent to the Editorial Office in the form of original mail or scanned document.
