Combination of Kansei Engineering and Ergonomic Function Deployment (EFD) in Designing Ergonomic Products: A Review Study

Niken Kristin Silitonga; Anizar; Rosnani Ginting

doi:10.32734/jsti.v28i2.25071

Authors

Niken Kristin Silitonga Universitas Sumatera Utara
Anizar Universitas Sumatera Utara
Rosnani Ginting Universitas Sumatera Utara

DOI:

https://doi.org/10.32734/jsti.v28i2.25071

Keywords:

Kansei Engineering, Ergonomic Function Deployment, Ergonomic Product Design, Ergonomics, Literature Review

Abstract

Industrial competition encourages product development to focus not only on functionality but also on user satisfaction, comfort, and safety. The integration of Kansei Engineering (KE) and Ergonomic Function Deployment (EFD) has attracted significant attention in ergonomic product design research, as it enables the systematic translation of users’ emotional needs into technical specifications. This article presents a literature review study that examines the application and integration of KE and EFD methods in ergonomic product design. The review is based on an analysis of national and international scientific journals addressing ergonomics, Kansei Engineering, and Ergonomic Function Deployment. The results indicate that the integration of KE and EFD effectively improves user comfort, safety, and satisfaction, while reducing the risk of musculoskeletal disorders and enhancing work productivity. Successful implementation is influenced by accurate identification of user requirements, the use of anthropometric data, ergonomic assessment tools, and close collaboration between designers and users. Furthermore, several studies highlight the importance of sustainable design by considering efficiency, occupational health, and product competitiveness. Overall, this review provides a comprehensive understanding of the potential and benefits of integrating Kansei Engineering and Ergonomic Function Deployment in ergonomic product design and offers a foundation for further research and practical implementation across various industrial sectors.

Downloads

Download data is not yet available.

References

[1] A. Budimansyah, S. Martini, and I. Mufidah, “Perancangan Alat Bantu Pengemasan Kompos Hijau dengan Pendekatan Ergonomic Function Deployment (EFD),” Jurnal Proses Kerja, vol. 12, no. 1, pp. 33–42, 2025.

[2] A. M. Ariana Putra, D. Nugroho, and B. Wahyudi, “Desain Alat Bantu Pemotongan Bambu Ramah Ergonomi Menggunakan Metode EFD dan REBA,” Jurnal Teknologi Produksi, vol. 10, no. 3, pp. 120–129, 2024.

[3] G. Arcidiacono, D. T. Matt, and E. Rauch, “Axiomatic Design of a Framework for the Comprehensive Optimization of Patient Flows in Hospitals,” Journal of Healthcare Engineering, vol. 2017, 2017, doi: 10.1155/2017/2309265.

[4] G. Arcidiacono, D. T. Matt, and E. Rauch, “Axiomatic Design of a Framework for the Comprehensive Optimization of Patient Flows in Hospitals,” Journal of Healthcare Engineering, vol. 2017, 2017, doi: 10.1155/2017/2309265.

[5] A. Anuradha and Bhattacharya, “Integrating Ergonomic Function Deployment and Kansei Engineering for Product Development,” 2015.

[6] G. Boothroyd, P. Dewhurst, and W. A. Knight, Product Design for Manufacture and Assembly, 3rd ed. Boca Raton, FL, USA: Taylor & Francis, 2010, doi: 10.1201/9781420089288.

[7] J. Dul and B. Weerdmeester, Ergonomics for Beginners: A Quick Reference Guide, 3rd ed. Boca Raton, FL, USA: CRC Press, 2008.

[8] D. Faisal, L. D. Fathimahhayati, and F. D. Sitania, “Penerapan Kansei Engineering dalam Desain Kemasan Takoyaki untuk UMKM,” Jurnal TEKNO, vol. 9, no. 2, pp. 45–53, 2021.

[9] A. P. Farahdiansari, “Perancangan Erkidz Chairs dengan Metode Pahl-Beitz dan EFD,” Jurnal Produk Anak Indonesia, vol. 8, no. 1, pp. 55–65, 2025.

[10] Q. Fu Guo, X. Qu, M. Nagamachi, and V. G. Duffy, “A Proposal of the ERP Method to Identify Kansei Words,” Ergonomic Design, vol. 15, no. 4, pp. 225–233, 2020.

[11] K. Grimsaeth, M. Gangwar, B. Baggerud, and R. Narain, “Kansei Engineering Based Emotional Product Design: An Illustration by a Battery Drill Case Study,” 2010.

[12] F. Guo, Q.-X. Qu, M. Nagamachi, and V. G. Duffy, “A Proposal of the Event-Related Potential Method to Effectively Identify Kansei Words for Assessing Product Design Features,” 2020.

[13] R. Ginting, Kuesioner: Alat Ukur Kepuasan Konsumen Terhadap Produk. Medan, Indonesia: USU Press, 2021.

[14] R. Ginting, Metode Perancangan Produk: Konsep dan Aplikasi. Medan, Indonesia: USU Press, 2022.

[15] R. Ginting, Kuesioner: Alat Ukur Kepuasan Konsumen Terhadap Produk. Medan, Indonesia: USU Press, 2022.

[16] R. Ginting, Perancangan dan Pengembangan Produk. Medan, Indonesia: USU Press, 2022.

[17] R. Ginting, DFMA (Design for Manufacture and Assembly): Teori dan Aplikasi. Medan, Indonesia: USU Press, 2023.

[18] R. Ginting, A. Ishak, A. Fauzi Malik, and M. R. Satrio, “Product Development with Quality Function Deployment (QFD): A Literature Review,” IOP Conference Series: Materials Science and Engineering, vol. 1003, no. 1, p. 012022, 2020, doi: 10.1088/1757-899X/1003/1/012022.

[19] R. Ginting, A. Ishak, and A. F. Malik, “Product Development and Design with a Combination of Design for Manufacturing or Assembly and Quality Function Deployment: A Literature Review,” AIP Conference Proceedings, vol. 2217, 2020, doi: 10.1063/5.0000739.

[20] S. Hahury, Masniar, and D. Ramadhani, “Pengembangan Alat Penyaring Tahu yang Ergonomis Menggunakan Metode EFD,” Industrial Engineering Journal – System, vol. 1, no. 2, pp. 16–29, 2023.

[21] M. Hartono, “The Modified Kansei Engineering-Based Application for Sustainable Service Design,” 2020.

[22] M. R. Hakim, D. Santoso, and R. Lestari, “Integrasi Kansei Engineering dan EFD dalam Desain Ergonomis: Sebuah Pendekatan Konseptual,” Jurnal Desain Industri, vol. 6, no. 2, pp. 101–113, 2024.

[23] M. Hartono, “Modified KE-Based Application for Sustainable Service Design,” Ergonomics, vol. 12, no. 3, pp. 155–167, 2020. ISO 9241-210:2019, Ergonomics of Human-System Interaction—Human-Centred Design for Interactive Systems. Geneva, Switzerland: International Organization for Standardization, 2019.

[24] T. Jessica, S. Benedikta, and M. Chrisdio, “Perancangan Stasiun Kerja Instruktur Laboratorium Desain Produk dan Inovasi dengan Pendekatan EFD dan Prinsip Ergonomi,” Jurnal Desain Fasilitas, vol. 7, no. 2, pp. 45–56, 2021.

[25] Y. Kirino and J. Hiraishi, “Affective Engineering Based on Kansei Mining Using NLP,” Journal of Intelligent Design, vol. 14, no. 2, pp. 88–102, 2022.

[26] M. Kikumoto, Y. Kurita, and S. Ishihara, “Kansei Engineering Study on Car Seat Lever Position,” 2021.

[27] R. Liu, T. Wang, and Y. Zhao, “Integration of Kansei Engineering and Quality Function Deployment for Smart Home Interface Design,” Applied Ergonomics, vol. 112, p. 104019, 2023.

[28] S. Lin, T. Shen, and W. Guo, “Evolution and Emerging Trends of Kansei Engineering: A Visual Analysis Based on CiteSpace,” 2021.

[29] Y. Lu, H. Zhang, and X. Chen, “Recent Developments of Kansei Engineering in Intelligent Product Design and Human-Centered Systems,” International Journal of Industrial Ergonomics, vol. 98, p. 103512, 2024.

[30] W. Lu, C. Ye, Y. Fang, V. Čok, and J.-F. Petiot, “A Systematic Review of Kansei Engineering in Vehicle Design,” 2024.

[31] L. Liu, H. Kim, and S. Lee, “Emotionally Intelligent Design of Smart Home Interfaces Integrating Kansei Engineering and QFD,” Journal of Smart Systems, vol. 17, no. 1, pp. 60–72, 2023.

[32] E. Megawati, W. S. Saputra, Y. Attaqwa, and S. Fauzi, “Edukasi Pengurangan Resiko Terjadinya Musculoskeletal Disorders (MSDs) Dini Pada Penjahit Keliling di Ngaliyan Semarang,” Jurnal BUDIMAS, vol. 3, no. 2, pp. 450–456, 2021.

[33] P. S. Mahardhika, “Analisis Wacana Tangan Kidal Pada Grup Facebook Koki (Komunitas Orang Kidal Indonesia),” Commercium, vol. 3, no. 3, pp. 168–179, 2021.

[34] M. Syukri and I. S., “Kebijakan pendidikan ramah bertangan kidal di Universitas Islam Negeri Sumatera Utara Medan,” Jurnal Media Kajian Pendidikan Agama Islam, vol. 11, no. 3, pp. 363–380, 2021, doi: 10.22373/jm.v11i3.10367.

[35] N. R. Nurwulan, “Impact of school chair on left-handed students,” Indonesian Journal of Computing, Engineering, and Design, vol. 5, no. 1, pp. 18–25, 2023, doi: 10.35806/ijoced.v5i1.313.

[36] N. R. Nurwulan and A. B. Kristiani, “Furnitur sekolah dan kelainan muskuloskeletal pada siswa kidal,” Jurnal Kesehatan Masyarakat, vol. 6, no. 2, pp. 128–134, 2020, doi: 10.24903/kujkm.v6i2.957.

[37] N. R. Nurwulan and A. B. Kristiani, “Potensi kelainan muskuloskeletal pada siswa kidal,” Jurnal Kesehatan Masyarakat Indonesia, vol. 15, no. 2, pp. 9–12, 2020, doi: 10.26714/jkmi.15.2.2020.9-12.

[38] N. R. Nurwulan and G. Selamaj, “Left-handedness and musculoskeletal discomfort in students,” Journal of Accessibility and Design for All, vol. 12, no. 2, pp. 320–334, 2022, doi: 10.17411/jacces.v12i2.281.

[39] M. Nagamachi, Kansei/Affective Engineering. Boca Raton, FL, USA: CRC Press, 2011. D. Rahardi, Metodologi Penelitian Terapan untuk Desain dan Ergonomi. Padang, Indonesia: Penerbit Andalas, 2020.

[40] R. A. D. Pratama, P. Aditama, M. C. Anam, and R. B. Jakaria, “Penerapan metode Ergonomic Function Deployment pada pembuatan alat bantu pemindahan barang,” Jurnal Ilmiah Sains dan Teknologi, vol. 9, pp. 377–385, 2024.

[41] M. Rababah and M. Etier, “A dataset on anthropometric measurements of children in Jordan for ergonomic product design,” 2024.

[42] M. Rasoulivalajoozi and R. Farhoudi, “Human-centered ergonomic product development using integrated emotional and technical design approaches,” International Journal of Human–Computer Interaction, vol. 41, no. 2, pp. 245–260, 2025.

[43] K. T. Sanjaya, A. Kalista, and M. A. Rizal, “Analisis postur kerja dan pengukuran konsumsi energi pekerja pengangkat batu untuk mengurangi musculoskeletal disorders,” Jurnal Ilmiah Teknik dan Manajemen Industri Universitas Kadiri, vol. 5, no. 2, pp. 88–99, 2022, doi: 10.30737/jatiunik.v5i2.2392.g2073.

[44] G. W. Salhuteru, N. E. Maitimu, and V. O. Lawalata, “Modifikasi kursi kuliah untuk mahasiswa kidal,” I Tabaos, vol. 3, no. 1, pp. 23–30, 2023, doi: 10.30598/i-tabaos.2023.3.1.23-30.

[45] S. Sinulingga, Metode Penelitian. Medan, Indonesia: USU Press, 2022. M. Siregar, “Perancangan mouse komputer vertikal dengan pendekatan Ergonomic Function Deployment (EFD) dan antropometri,” Jurnal Perangkat Komputer, vol. 11, no. 1, pp. 89–97, 2025.

[46] Tarwaka, S. H. Bakri, and L. Sudiajeng, Ergonomi untuk Keselamatan, Kesehatan Kerja dan Produktivitas, 1st ed. Surakarta, Indonesia: UNIBA Press, 2004.

[47] M. Rasoulivalajoozi and M. Farhoudi, “Socio-emotional aspects in wheelchair design: A Kansei engineering approach,” Journal of Rehabilitation Design, vol. 9, no. 1, pp. 15–28, 2025.

[48] M. S. Hahury, Masniar, and R. Delvin, “Pengembangan alat penyaring tahu ergonomis menggunakan metode Ergonomic Function Deployment (EFD),” Jurnal Produksi, vol. 5, no. 3, pp. 77–86, 2023.

[49] K. Soebandrija, “Integrasi Kansei Engineering dan Ergonomic Function Deployment untuk desain produk yang berorientasi pengguna,” Jurnal Teknologi dan Rekayasa Industri, vol. 5, no. 4, pp. 210–219, 2019.

[50] C. Wei, L. Zhang, and J. Ma, “Integrating Kansei Engineering and TRIZ for creative packaging design,” Journal of Innovation Design, vol. 22, no. 3, pp. 140–149, 2021.

[51] Xiezie et al., “Ergonomic Function Deployment: A review of literature,” 2018.

[52] Xiu et al., “Integrating Ergonomic Function Deployment into product design,” 2019.

[53] M. M. Yafi, L. Hakim, and J. Felani, “Analisis postur kerja operator inbound dengan menggunakan metode RULA,” Jurnal Sistem dan Teknik Industri, vol. 3, no. 2, pp. 237–242, 2022.

[54] W. Zhang, A. Nieuwenhuys, and Y. Zhang, “Posture prediction models in digital human modeling for ergonomic design: A systematic review,” 2025.

[55] D. Zhou, J. Chen, C. Lv, and Q. Cao, “A method for integrating ergonomics analysis into maintainability design in a virtual environment,” 2019.