Applying Computer Integrated Manufacturing for Productivity Improvement: A Literature Review
DOI:
https://doi.org/10.32734/jsti.v23i2.6279Keywords:
Computer Integrated Manufacturing, Computer Technology, Information SystemAbstract
In this era of globalization, information technology, especially through the use of computer technology (program and software) is developing rapidly and has aN enormous impact on the manufacturing industry to support companies as a solving problems tool related to manufactured products that rely on input, process, and output, as well as Increasing effectiveness, efficiency, and productivity. The purpose of this study is to review various literature regarding the application of Computer Integrated Manufacturing (CIM) in the manufacturing company. Also, the scope of this study is to discuss and analyse in depth the related articles through the identification of scientific publications from 2001 to 2021, published in databases and electronic journals in English, and 30 items selected.
Downloads
References
C.M. Kumile and G. Bright, “Sensor Fusion Control System For Computer Integrated Manufacturing”, South African Journal of Industrial Engineering, Vol 19(1): 179-194, May 2008.
D. Mourtzis and E. Vlachou, “Cloud-based cyber-physical systems and quality of services”, The TQM Journal, 28(50), 704-733. doi.org/10.1108/TQM-10- 2015-0133, 2016.
Y. Jason Z, “Relating Learning Capability to The Success of Computer-Integrated Manufacturing”, Technological Forecasting & Social Change, Vol. 69, No.1, 2002.
S. H. Suh, S. J. Shin, J. S. Yoon and J. M. Um, “A New Paradigm for Product Design And Manufacturing via Ubiquitous Computing Technology", International Journal of Computer Integrated Manufacturing, 21(5): 540 – 549. 2008.
S. Dongmin and WYSK Richard, “A Simulation Model of a Human as a Material Handling Task Performer with a Colored Petri Net Model”, Systemics, Cybernetics And Informatics, Volume 3 - Number 1 ISSN: 1690-4524, 2005.
S. Julia and S.J. Khair, “Cloud Manufacturing: A Service-Oriented Manufacturing Paradigm. A Review Paper”, Engineering Management in Production and Services, Volume 10, Issue 1, 2018.
M. Yuan, K. Deng, and W.A. Chaovalitwongse, “Manufacturing Resource Modeling for Cloud Manufacturing”, International Journal of Intelligent Systems, 32(4), 414-436. doi: 10.1002/int.21867, 2017.
Z. Laghari, “Computer Integrated Product Manufacturing Development”, International Journal of Scientific & Engineering Research, Volume 11, Issue 7, 231 ISSN 2229-5518, July-2020.
V.K. Kedambadi and R. Swaroop, “Computer Integrated Manufacturing: A Powerful Technique for Improving Productivity”, 2012 [Online]. Available: https://scholar.google.co.in/citations?user=1Kp0cm0AAAAJ&hl=en. [Accessed: May, 22, 2021]
R. Abdelkarim, K. Amal, and E.A. Bouchra, “Reference Architecture for Efficient Computer Integrated Manufacturing”, Architecture for Efficient Computer Integrated Manufacturing. DOI: 10.5220/0010497903280334 In Proceedings of the 23rd International Conference on Enterprise Information Systems (ICEIS) - Volume 1, pages 328-334 ISBN: 978-989-758-509-8, 2021.
W. Cheng, FAN. Yushun, and X. Deyun, “Computer Integrated Manufacturing”, Part 1 Handbook of Industrial Engineering, 3rd Edition, Published by John Wiley & Sons, May, 2001. Available: https://doi.org/10.1002/9780470172339.ch15. [Accessed: May, 21, 2021].
S. M. Bhosle, A. H. Kolekar and P. D. Darade, “Revitalising the Manufacturing Industries through CIM”, Proceedings of the International Conference on Industrial Engineering and Operations Management Istanbul, Turkey, July 3 – 6, 2012.
M. Akash, M.K, Raj, K. Manish, and S.Vengatesan, “International Journal of Innovative Research in Science, Engineering and Technology”, IJIRSET, DOI:10.15680/IJIRSET.2017.0603210, Vol. 6, Issue 3, March 2017.
N. Hassan, “A Hybrid Reconfigurable Computer Integrated Manufacturing Cell for Mass Customisation”, thesis, School of Mechanical Engineering, University of KwaZulu Natal, Africa, 2011.
N. Hassan and G. Bright, “A Hybrid Reconfigurable Computer-Integrated Manufacturing Cell for The Production of Mass Customised Parts”, South African Journal of Industrial Engineering, Vol 23(1): pp 139-150, May 2012.
A.Q. Mohammad, S. Pulkit, K. Siddharth, “Accelerating Productivity through Computer Integrated Manufacturing”, International Journal of Innovative Research in Science, Engineering and Technology, Copyright to IJIRSET DOI: 10.15680/IJIRSET.2015.0404037, Vol. 4, Issue 4, April 2015.
M. Tariq and K. Iqbal, “Productivity Improvement through Computer Integrated Manufacturing in Post WTO Scenario”, National Conference on Emerging Technologies (NCET-2004), SZABIST, Karachi, Pakistan, December 18-19, 2004.
K. Andrzej, “Computer Integrated Enterprise In The MRP/ERP Software Implementation”, Foundations of Management, ISSN 2080-7279 DOI: 10.2478/v10238-012-0026-7, Vol. 2, No. 2, 2010.
B. Marwa, A. Mohamed Ayadi, C. Vincent, and H. Mohamed. “Towards Management of Knowledge and Lesson Learned In Digital Factory”, Proceedings of Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing,Toulouse, France, June 18th–20th, 2014.
P.G. Kamble and S.S. Hebbal, “An Overview of Manufacturing Enterprise Modeling and Applications for CIM Environment”, Contemporary Engineering Sciences, No. 5, 201 – 214, Vol. 3, 2010.
K. Chwesluk, “Computer Systems Aided Management in Logistics”, International Journal on Marine Navigation and Safety of Sea Transportation, Number 3, Volume 6, September 2012.
H. Hairulazwan and A.K. Herdawatie, “Implementing Ethernet In Computer Integrated Manufacturing System”, Proceeding ofthe 6th International Symposium on Mechatronics and its Applications (ISMA09), Sharjah, UAE, March 24-26,2009.
C.C. Okpala, C.E. Okechukwu, and F.O. Ifeyinwa, “Computer Integrated Manufacturing Implementation: Benefits and Challenges”, International Journal of Latest Technology in Engineering, Management & Applied Science (IJLTEMAS), | ISSN 2278-2540, Volume IX, Issue III, March 2020.
L. Raphael, R. Matthieu, and Y.H. Jean, “An eXtended Manufacturing Integrated System for feature based manufacturing with STEP-NC”, International Journal of Computer Integrated Manufacturing, Volume 24, 2011 - Issue 9, Pages 785-799, 2011.
H. Iftikhar, and M.A.A. Abdulrahman, “Planning and Design of Computer Integrated Manufacturing Systems Using an Expert System”, The 6th Saudi Engineering Conference, KFUPM, Dhahran, Vol. 4, p. 521-534, 2002.
A.F.M. Juan, G. Cipriano, C.M. Ana, and G. Javier, “A Software Framework for Coping with Heterogeneity in The Shopfloor”, Emerald Group Publishing Limited [ISSN 0144-5154] [DOI 10.1108/01445150710827113], p. 333-342, 2007.
S.A. Morteza, “Design of Computer Integrated Manufacturing System for Irankhodro Auto Industry”, Journal of Modern Processes in Manufacturing and Production, Vol. 3, No. 4, Autumn 2014.
B. Nadia, G. Gerard, and Y. Dayoosh, “Scheduling of A Computer Integrated Manufacturing System: A Simulation Study”, Journal of Industrial Engineering and Management - http://dx.doi.org/10.3926/jiem.331, JIEM,– Online ISSN: 2013-0953 – Print ISSN: 2013-8423 http://dx.doi.org/10.3926/jiem.331, Vol– 4(4), p. 577-609, 2011.
C.J. Moin, R. Haque, and A.K.M.. Mahabubuzzaman, “A Study on Computer Integrated Manufacturing Method in Bangladeshi Textile Industry”, J. Innov. Dev. Strategy, ISSN-1997-2571 (Online) & ISSN-2075-1648, Vo. 4(1), p. 5-11, 2010.
M. Khamdi, “The Issues for The Implementation of Reconfigurable Manufacturing Systems in Small and Medium Manufacturing Enterprises”, ARIKA, ISSN: 1978-1105, Vol. 04, p. 81-88, 2010.
P.G. Mikell, Handbook of Automation, Production System, and Computer-Integrated Manufacturing”, Fourth Edition, Handbook of Industrial Engineering, Published by PEARSON, May, 2001. Available: https://doi.org/10.1002/9780470172339.ch15. [Accessed: May, 21, 2021].
Published
How to Cite
Issue
Section
Copyright (c) 2021 Jurnal Sistem Teknik Industri
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to TALENTA Publisher Universitas Sumatera Utara as the publisher of the journal.
Copyright encompasses the rights to reproduce and deliver the article in all forms and media. The reproduction of any part of this journal, its storage in databases, and its transmission by any form or medium will be allowed.
