A Systematic Literature Review of Six Sigma Implementation on the Automotive Component Industry

Yaman Parid; Humiras Hardi Purba; Suprapto  Santoso

doi:10.32734/jsti.v25i2.10450

Authors

Yaman Parid Universitas Mercu Buana
Humiras Hardi Purba Universitas Mercu Buana
Suprapto Santoso Jakarta Global University

DOI:

https://doi.org/10.32734/jsti.v25i2.10450

Keywords:

Six Sigma, Systematic Literature Review (SLR), Automotive Component Industry, DMAIC

Abstract

The main purpose of this white paper is to analyze current research on Six Sigma in the auto parts industry and identify opportunities for further research. This study used a systematic literature search of the most recent scientific articles (2013-2022) searched using specific inclusion and exclusion criteria. His two main categories of research goals emerged. The development of Six Sigma and the impact of Six Sigma. In recent years, research on the impact of Six Sigma is the most popular and has always been there from year to year, while research on the development of Six Sigma is the least popular. The study can provide insights to researchers, consultants and quality managers in developing and implementing Six Sigma in the automotive components industry sector. This research found that there is a lot of research on the complete Six Sigma methodology in the automotive component industry, especially research on the impact of implementing Six Sigma. From these findings, the main avenue for future research can be identified, namely Six Sigma Digitalization.

Downloads

Download data is not yet available.

Author Biographies

Humiras Hardi Purba, Universitas Mercu Buana

Industrial Engineering, Mercu Buana University, Jl. South Meruya, Jakarta 11650, Indonesia

Suprapto Santoso, Jakarta Global University

^{Informatica Engineering, Jakarta Global University, Jl. Jatiwaringin raya, Jakarta 17411, Indonesia}

References

N. F. Habidin, S. Mohd Yusof, and N. Mohd Fuzi, “Lean Six Sigma, strategic control systems, and organizational performance for automotive suppliers,” Int. J. Lean Six Sigma, vol. 7, no. 2, pp. 110–135, 2016, doi: 10.1108/IJLSS-04-2015-0013.

S. Bhat, E. V. Gijo, and N. A. Jnanesh, “Application of Lean Six Sigma methodology in the registration process of a hospital,” Int. J. Product. Perform. Manag., vol. 63, no. 5, pp. 613–643, 2014, doi: 10.1108/IJPPM-11-2013-0191.

P. Guleria, A. Pathania, R. K. Shukla, and S. Sharma, “Lean six-sigma: Panacea to reduce rejection in gear manufacturing industry,” in Materials Today: Proceedings, 2021, vol. 46, pp. 4040–4046, doi: 10.1016/j.matpr.2021.02.559.

A. Widodo and D. Soediantono, “Benefits of the Six Sigma Method ( DMAIC ) and Implementation Suggestion in the Defense Industry : A Literature Review Manfaat Metode Six Sigma ( DMAIC ) dan Usulan Penerapan Pada Industri Pertahanan : A Literature Review,” … J. Soc. Manag. Stud., vol. 3, no. 3, pp. 1–12, 2022, [Online]. Available: https://ijosmas.org/index.php/ijosmas/article/view/138%0Ahttps://ijosmas.org/index.php/ijosmas/article/download/138/104.

M. Bhargava and S. Gaur, “Process Improvement Using Six-Sigma (DMAIC Process) in Bearing Manufacturing Industry: A Case Study,” in IOP Conference Series: Materials Science and Engineering, Jan. 2021, vol. 1017, no. 1, doi: 10.1088/1757-899X/1017/1/012034.

A. Chiarini, “Lean Six Sigma and Industry 4.0 Integration for Operational Excellence: Evidence from Italian manufacturing companies,” Cardiff Univ., vol. 59, 2021.

O. Erdil, “Embedding Sustainability in Lean Six Sigma Efforts Embedding Sustainability in Lean Six Sigma Efforts Nadiye O. Erdil Can B. Aktas,” 2018, [Online]. Available: https://digitalcommons.newhaven.edu/mechanicalengineering-.

L. B. M. Costa, M. Godinho Filho, L. D. Fredendall, and F. J. Gómez Paredes, “Lean, six sigma and lean six sigma in the food industry: A systematic literature review,” Trends Food Sci. Technol., vol. 82, pp. 122–133, 2018, doi: 10.1016/j.tifs.2018.10.002.

P. Bajaj et al., “Coupled Effect of Electronic Medical Record Modifications and Lean Six Sigma Methodology on Rheumatoid Arthritis Disease Activity Measurement and Treat‐to‐Target Outcomes,” ACR Open Rheumatol., vol. 3, no. 3, pp. 164–172, 2021, doi: 10.1002/acr2.11233.

A. Fink, Conducting Research Literature Reviews: From the Internet to Paper, Fourth Edi. Calofornia: SAGE Publications Inc., 2014.

J. Cruz-Benito, “Systematic Literature Review & Mapping,” Salamanca, 2016. doi: 10.5281/zenodo.165773.

S. Sundana and B. Yusuf, “Analisis Kualitas untuk Mengurangi No Good In Process Core Assy 2wv dengan Menggunakan Metode Six Sigma (Studi Kasus di PT. Denso Indonesia),” 2013.

G. V. S. S. Sharma and P. S. Rao, “A DMAIC approach for process capability improvement an engine crankshaft manufacturing process,” J. Ind. Eng. Int., vol. 10, no. 2, Jun. 2014, doi: 10.1007/s40092-014-0065-7.

M. Raju, G. K. Nithyanandam, and G. Srinivasan, “Defects Reduction in Steering Gear Product using Six Sigma Methodology,” vol. 598, pp. 647–651, 2014, doi: 10.4028/www.scientific.net/AMM.598.647.

O. A. W. Rijanto, “Analisis Pengendalian Mutu Proses Machining Alloy Wheel Menggunakan Metode Six Sigma,” J. Ilm. Tek. Ind., vol. 13, no. 2, pp. 177–186, 2014.

L. Danny Dharmawan Dan Yurida Ekawati, “Peningkatan Kualitas Knalpot Pada Pt Fajar Indah Menggunakan Metode Six Sigma,” 2014.

B. Yorie and M. Putro, “Pendekatan Lean Six Sigma Dan Metode Weighted Product Untuk Mengurangi Waste Pada Proses Produksi Spare Part Oem Di Pt. Sinar Agung Selalu Sukses,” 2014.

S. Irawan, “Pendekatan Metode Six Sixma (Dmaic) Dan Proses Audit (Cppp) Untuk Peningkatan Kualitas Di Pt. Igp,” 2014.

C. I. Parwati, “Minimasi Ng Bintik Pada Proses Pengecatan Part Front Fender 1pa Red Met 7 Dengan Pendekatan Six Sigma Di Pt. Abc,” 2014.

R. Suseno, “Analisis Pengendalian Kualitas Six Sigma Dengan Metode Define, Measure, Analyze, Improve, Control (Dmaic) Terhadap Lini Z Proses Produksi Mobil Kijang Di Pt. Toyota Motor Manufacturing Indonesia,” Suseno, vol. 8, no. 1, pp. 35–44, 2014, [Online]. Available: https://jurnal.umj.ac.id/index.php/jisi/article/view/8537.

R. K. Misra and A. Chauhan, “Six Sigma approach for reducing rejection of in-house cast component,” 2015.

M. Abdul Rahman, A. K. M. Mohiuddin, and H. Abdullah, “Painting Process Improvement through Six Sigma Approach in a Malaysian Vehicle Assembly Company,” Adv. Mater. Res., vol. 1115, pp. 596–600, Jul. 2015, doi: 10.4028/www.scientific.net/amr.1115.596.

D. Caesaron, “Penerapan Metode Six Sigma Dengan Pendekatan Dmaic Pada Proses Handling Painted Body Bmw X3 (Studi Kasus: Pt. Tjahja Sakti Motor),” 2015.

C. Christoper and H. Suliantoro, “Analisa Pengendalian Kualitas dengan Menggunakan Metode Six Sigma untuk Part NXS-001 pada PT Inti Pantja Press Industri,” Ind. Eng. Online J., vol. 4, no. 4, 2015.

W. Sudarwati and A. Wijaya, “Penggunaan Metode Six Sigma Dalam Upaya Menurunkan Cacat Mengalir ( Flow Out ) Ke Metal Finish ( Dept Body Welding ) Di Pt.Adm Press-Plant,” JISI J. Integr. Sist. Ind. Vol., vol. 2, no. 2, 2015, doi: 10.24853/jisi.4.1.pp-pp.

F. Zahara, “Pengendalian Kualitas Part Trim Rear Quarter Right APV Arena dengan Menggunakan Metode Six Sigma di PT. Suzuki Indomobil Motor,” J. Optimasi Sist. Ind., vol. 13, no. 1, p. 486, 2016, doi: 10.25077/josi.v13.n1.p486-502.2014.

R. o Kawi, “Penerapan Six Sigma Sebagai Alat Bantu Statistik Untuk Pengendalian Kualitas Produk Disk Brake,” 2015.

A. Yadav and V. K. Sukhwani, “Quality Improvement by using Six Sigma DMAIC in an Industry,” vol. 6, no. 6, pp. 41–46, 2016.

M. Norzaimi and C. Ani, “Solving Quality Issues in Automotive Component Manufacturing Environment by utilizing Six Sigma DMAIC Approach and Quality tools,” pp. 1986–1997, 2016.

F. Sucipto, M. Y. Lubis, and M. Iqbal, “Minimasi Penyebab Produk Cacat Pada Workstation Production Di Pt. Xyz Dengan Pendekatan Metode Six Sigma,” eProceedings Eng., vol. 3, no. 1, 2016.

I. Ritme, P. Siallagan, D. Redantan, and Z. Arifin, “Pengendalian Reject Contamination On Marking Pada Proses Mark Scan Pack (Msp) Dengan Pendekatan Six Sigma (Studi Kasus Di Pt. Infineon Technologies Batam) The Control Of Reject Contamination On Marking Of Mark Scan Pack Process (Msp) By Six Sigma Approach (Case Study in PT. Infineon Technologies Batam),” PROFISIENSI, vol. 4, no. 1, pp. 37–46, 2016.

V. B. Kusumo, “Peningkatan Laju Produksi Dengan Meminimasi Waste Menggunakan Metode Lean Six Sigma (Studi Kasus: PT. Indobatt Industri Permai),” 2016. [Online]. Available: www.tcpdf.org.

P. Kaushik and S. Kumar, “An application of six sigma for SMEs: A case study,” Manag. Sci. Lett., vol. 7, no. 3, pp. 145–152, 2017, doi: 10.5267/j.msl.2016.12.002.

B. Noori and M. Latifi, “Development of Six Sigma methodology to improve grinding processes: A change management approach,” Int. J. Lean Six Sigma, vol. 9, no. 1, pp. 50–63, 2017, doi: 10.1108/IJLSS-11-2016-0074.

M. Imtihan, “Redesign Alat Tambahan Pada Mesin Produksi Komponen Otomotif Body Inner Dalam Meningkatkan Kualitas Melalui Strategi Dmaic,” JIEM, vol. 2, no. 2, 2017.

L. Anggarini, “Reduksi Defect Dan Variasi Tebal Plat Berpasta Pada Proses Pasting Dengan Metode Lean Six Sigma (Studi Kasus : Pt. Indobatt Industri Permai),” 2017.

N. Swastika Eryan, “Quality Control Untuk Produksi Spare Part Pada Pt. Ypti Divisi Plastic Injection Menggunakan Metode Six Sigma,” 2017.

W. Djalmono Putro, A. Slamet, A. Maulana Teknik Mesin Produksi dan Perawatan, P. Negeri Semarang, and S. JlProfHSudarto, “Perbaikan Kualitas Proses Produksi Dengan Metode Six Sigma Untuk Mengurangi Cacat Produk Pada Partmaster Cylinder Tipe 2dp Di Departemenpainting Pt. Chemco Harapan Nusantara Cikarang,” 2017.

N. Widyaningsih, “Usulan Penerapan Metode Lean Six Sigma Untuk Meminimasi Waste pada Proses Produksi Mainframe K 16R di PT. Pamindo Tiga T.”

D. P. T. X. Erizal, “Analisis Kualitas Produk Panel Front Door Outer Toyota Kijang Kapsul Dengan Metode Six Sigma,” 2017.

J. Ekonomi, M. & Bisnis, I. Ambar, S. Dan, and M. Bernik, “Penggunaan New And Old Seven Tools Dalam Penerapan Six Sigma Pada Pengendalian Kualitas Produk Stay Headrest,” J. Ekon. Manaj. Bisnis, vol. 19, no. 1, 2018.

E. Christy, “Upaya Peningkatan Kualitas Wheel Dengan Metode Six Sigma Di PT. Meshindo Alloy Wheel,” J. Rekayasa dan Manaj. Sist. Ind., vol. 6, no. 7, pp. 1472–1483, 2018, [Online]. Available: www.tcpdf.org.

S. K. Gandhi, A. Sachdeva, and A. Gupta, “Reduction of rejection of cylinder blocks in a casting unit: A six sigma DMAIC perspective,” J. Proj. Manag., pp. 81–96, 2019, doi: 10.5267/j.jpm.2019.1.002.

P. B. Ranade, P. J. Ugale Mechanical Deapartment, and S. C. Pagare, “Defect Analysis and Implementation of DMAIC Methodology for Defect Reduction in Tyre Manufacturing,” Int. J. Innov. Res. Appl. Sci. Eng., vol. 3, no. 5, pp. 479–482, 2019, doi: 10.29027/IJIRASE.v3.i5.2019.

P. Pathmanaban, “Six Sigma Methodologies for Increasing the First Pass Rate of Engines in Manufacturing,” J. Adv. Res. Qual. Control Manag., vol. 04, no. 01, pp. 24–30, Aug. 2019, doi: 10.24321/2582.3280.201904.

A. Nindiani, R. Nursikin, A. Kustia, T. Sertiadi, W. Ni, and W. Puji, “Penurunan Cacat Produk Garnish-Assembly Tailgate Di Perusahaan Otomotif Melalui Pendekatan Metode Dmaic,” Ind. Xplore, vol. 04, no. 01, 2019.

D. Fitrianto, “Disain Perbaikan Kualitas Produk dengan Pendekatan Six Sigma di PT. Prima Alloy Steel Universal.”

E. Haryanto, “Analisa Penurunan Cacat (Defect) Cat Bintik Debu Dengan Metodologi Six Sigma Pada Proses Painting Produk Fuel Tank Di Pt. Sso Tangerang.”

A. Trimarjoko, D. S. Saroso, H. H. Purba, S. Hasibuan, C. Jaqin, and S. Aisyah, “Integration of nominal group technique, Shainin system and DMAIC methods to reduce defective products: A case study of tire manufacturing industry in Indonesia,” Manag. Sci. Lett., vol. 9, no. Spceial Issue 13, pp. 2421–2432, 2019, doi: 10.5267/j.msl.2019.7.013.

E. Maryani, H. H. Purba, and S. Sunadi, “Process Capability Improvement Through DMAIC Method for Aluminium Alloy Wheels Casting,” J. Ind. Eng. Manag. Res., vol. 1, no. 4, pp. 19–26, 2020.

I. Setiawan and S. Setiawan, “Defect reduction of roof panel part in the export delivery process using the DMAIC method: a case study,” J. Sist. dan Manaj. Ind., vol. 4, no. 2, pp. 108–116, Dec. 2020, doi: 10.30656/jsmi.v4i2.2775.

Supriyati, “Analisis Cacat Painting Pada Komponen Automotive Dengan Pendekatan Dmaic,” P. 2020, 2020.

D. Armandhika Utomo and E. Rimawan, “Menggunakan Metode Lean Six Sigma-Dmaic,” 2020.

Sundaramali, “Application of DMAIC to Reduce the Rejection Rate of Starter Motor Shaft Assembly in the Automobile Industry: A Case Study,” Int. J. Ind. Eng. Prod. Res., vol. 32, no. 3, 2021, doi: 10.22068/ijiepr.32.3.1.

M. Bhargava and S. Gaur, “Process Improvement Using Six-Sigma (DMAIC Process) in Bearing Manufacturing Industry: A Case Study,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1017, no. 1, pp. 0–14, 2021, doi: 10.1088/1757-899X/1017/1/012034.

P. Guleria, A. Pathania, R. Kumar, and S. Sharma, “Materials Today : Proceedings Lean six-sigma : Panacea to reduce rejection in gear manufacturing industry,” Mater. Today Proc., no. xxxx, 2021, doi: 10.1016/j.matpr.2021.02.559.

B. Ariyanto, P. Gajah Tunggal, T. -Indonesia, S. Sudarto, and T. D. Sofianti, “Improving Work in Process Quality (Bias Cutting Process) by Using Poka-Yoke and Define Measure Analysis Improve and Control (DMAIC) Method in Leading Motorcycle Tire Manufacturing.”

E. Sukirno, J. Prasetyo, R. Rosma, and M. Hayu Raras Sita Rukmika Sari, “Implementasi Metode Six Sigma Dmaic Untuk Mengurangi Defect Pipe Exhaust Xe 611,” JAPTI J. Apl. Ilmu Tek. Ind., vol. 2, no. 2, pp. 10–18, 2021, [Online]. Available: www.journal.univetbantara.ac.id/index.php/japti.

A. M. Rani and Y. R. Wahyudi, “Peningkatan Kualitas Part Painting Plastik Menggunakan Metode Six Sigma Di PT XYZ Jakarta,” Jisi J. Integr. Sist. Ind., vol. 8, no. 1, pp. 35–44, 2021, doi: 10.24853/jisi.8.1.36-44.

J. D. Suda, “Aplikasi Metode Six Sigma Untuk Meningkatkan Kualitas Produksi Silinder Kompresi,” 2021.

D. Prasetyo, “Pendekatan Lean Six Sigma Sebagai Upaya Meminimalkan Waste Dan Meningkatkan Efisiensi Kerja Pada Produksi Leaf Spring Type MSM 2230 (Studi Kasus PT. Indospring Tbk),” 2022, doi: 10.350587/Matrik.

J. Ohlig, P. Poetters, and B. Leyendecker, “The Impact of Digitalization on the Define Phase of the Six Sigma Methodology,” Proc. Int. Conf. Ind. Eng. Oper. Manag., pp. 232–242, 2021.

A. Lipsmeier, A. Kühn, R. Joppen, and R. Dumitrescu, “Process for the development of a digital strategy,” Procedia CIRP, vol. 88, pp. 173–178, 2020, doi: 10.1016/j.procir.2020.05.031.

V. L. Da Silva, J. L. Kovaleski, R. N. Pagani, J. D. M. Silva, and A. Corsi, “Implementation of Industry 4.0 concept in companies: empirical evidences,” Int. J. Comput. Integr. Manuf., vol. 33, no. 4, pp. 325–342, 2020, doi: 10.1080/0951192X.2019.1699258.

S. Xiao, Y. Li, M. Rotaru, and J. K. Sykulski, “Six sigma quality approach to robust optimization,” IEEE Trans. Magn., vol. 51, no. 3, pp. 1–4, 2015, doi: 10.1109/TMAG.2014.2360435.