Penentuan Interval Waktu Perawatan Mesin Blowing dan Mesin Filling Menggunakan Teori Reliability dan Model Age Replacement (Studi Kasus pada PT.  XYZ) : -

Endang Prasetyaningsih; Ilyas Ruchiyat; Chaznin R.  Muhammad

doi:10.32734/jsti.v22i2.3762

Authors

Endang Prasetyaningsih Universitas Islam Bandung
Ilyas Ruchiyat Universitas Islam Bandung
Chaznin R. Muhammad Universitas Islam Bandung

DOI:

https://doi.org/10.32734/jsti.v22i2.3762

Keywords:

Age Replacement Model, downtime, reliability

Abstract

Engine performance will decrease when it is operated continuously so that maintenance is needed. Improper maintenance time intervals can reduce engine reliability and still causes machine damage suddenly. Therefore, maintenance time intervals must be determined precisely. This study aims to determine the engine maintenance time intervals using Reliability Theory and Age Replacement Model, then calculate the total maintenance cost. The result shows that the application of new maintenance time interval increases machine reliability.

Downloads

Download data is not yet available.

References

[1] J. Purnama, Y. A. Putra, dan M. Kalamollah, “Metode Age Replacement Digunakan untuk Menentukan Interval Waktu Perawatan Mesin pada Armada Bus”, Seminar Nasional Sains dan Teknologi Terapan III, 13 Oktober 2015, editor: S. Syamsuri, Institut Teknologi Adhi Tama Surabaya (ITATS), Surabaya, Indonesia, 2015, pp. 115 – 126.
[2] M. Hariadi, “Penentuan Interval Waktu Penggantian Komponen Kritis pada Mesin Multi Block Menggunakan Metode Age Replacement (Studi Kasus Di CV. Walet Sumber Barokah)”, Tugas Akhir, Universitas Muhammadiyah Malang, Malang, Jawa Timur, Indonesia, 2017.
[3] Y. Y. Prawiro, “Penentuan Interval Waktu Penggantian Komponen Kritis pada Mesin Volpack Menggunakan Metode Age Replacement”, Jurnal Teknik Industri, vol. 16, no. 2, pp. 92-100, 2015.
[4] R. Wahyuniardi, Arumsari H., R. Triana, “Penentuan Interval Perawatan dengan Menggunakan Model Age Replacement di PT. “X” , Prosiding Seminar Nasional Mesin dan Industri (SNMI X), Jakarta, 21-22 April 2016, editor: A.P. Irawan, Prodi Teknik Mesin dan Teknik Industri, Universitas Tarumanagara, Jakarta, 2016, pp. TI-174 – TI-181.
[5] S. D. Mutiara, A. Rahman, dan I. Hamdala, “Perencanaan Preventive Maintenance Komponen Cane Cutter I dengan Pendekatan Age Replacement (Studi Kasus di PG Kebon Agung Malang)”, Jurnal Rekayasan dan Manajemen Sistem Industri, vol 2, no 2, pp. 396-405, 2014.
[6] A. S. Corder, “Maintenance Management Techniques,” diterjemahkan dari bahasa Inggris Oleh Hadi, K., 1988. Jakarta: Penerbit Erlangga.
[7] S.O., Duffua dan A. Raouf, 2015, “Planning and control of maintenance Systems,” 2nd. ed. Switzterland: Springer, e-boook.
[8] K.R. Mobley, L.R. Higgins, dan D.J. Wikkof, “Maintenance Engineering Handbook”, 7th. ed. New York : Mcgraw Hill <http://gen.lib.rus.ac>. 2008 e-book.
[9] N. Ansori dan M.I. Mustajib, “Sistem Perawatan Terpadu,” Yogyakarta: Graha Ilmu, 2013.
[10] A. K. S. Jardine dan A. H. C. Tsang, “Maintenance, replacement and reliability,”. 2nd . ed . Boca Raton: Taylor & Francis Group, 2013, e-book.
[11] I., Soesetyo dan L. Y. Bendatu, “Penjadwalan predictive maintenance dan biaya perawatan mesin pallet di PT. Chaeron Pokphand Indonesia– Sepanjang,” Jurnal Teknik Industri, vol 2, no. 2, pp.147-154, 2014.