Model Formulation for Estimating Oil Extraction Rate to Measure Oil Extraction Efficiency in Palm Oil Mill
DOI:
https://doi.org/10.32734/jsti.v25i1.10596Keywords:
OER, HQE, FCI, Parameter of Performance, Palm Oil MillAbstract
FFB that has high HQE and FCI will determine the OER that will be obtained at POM, so that OER can be estimated using HQE and FCI, ie by calculating the oil content in FFB and the potential for oil loss in loose fruit that is not collected in the plantation area. The purpose of this study was to formulate an OER estimation model to determine the processing efficiency of POM. This research is a qualitative and quantitative analysis research, which is a scientific study to formulate an OER estimation model based on HQE and FCI parameters which will be used as the dependent variable. Based on the results and discussion it can be concluded that OER, which is a parameter of oil palm processing performance at POM, can be estimated using a model formulation developed from HQE and FCI variables, where these variables are indicators of FFB harvesting performance in oil palm plantations.
Downloads
References
Badan Pusat Statistik, Statistik Kelapa Sawit Indonesia 2021. Jakarta: BPS, 2022. [Online]. Available from BPS, https://www.bps.go.id/publication/2022/11/30/254ee6bd32104c00437 a4a61/statistik-kelapa-sawit-indonesia-2021.html. [Accessed: Dec. 18, 2022].
Badan Pusat Statistik, Nilai Ekspor Migas-NonMigas (Juta US$), 2021. Jakarta: BPS, 2022. [Online]. Available from BPS, https://www.bps.go.id/indicator/8/1753/2/nilai-ekspor-migas-nonmigas.html. [Accessed: Dec. 18, 2022].
P. Naibaho, Teknologi Pengolahan Kelapa Sawit, Medan: Pusat Penelitian Kelapa Sawit, 1998.
M. Pardamean, Panduan Lengkap Pengolahan Kebun dan Pabrik Kelapa Sawit, Jakarta: PT Agro Media Pustaka, 2008.
A. Mangoensoekardjo, and H. Semangun, Manajemen Agrobisnis Kelapa Sawit, Yogyakarta: Gadjah Mada University Press, 2008.
I. Pahan, Panduan Lengkap Kelapa Sawit: Manajemen Agribisnis Dari Hulu Hingga Hilir, Jakarta: Penebar Swadaya, 2006.
M. Hudori, “Formulasi Model Nilai Sortasi Panen (NSP) dan Indeks Pengutipan Brondolan (IPB) sebagai Indikator Kinerja Pemanenan Kelapa Sawit,” Jurnal Citra Widya Edukasi, vol. 10, no. 1, pp. 87-96, 2019a.
M. Hudori, “Implementation of Poka Yoke on Administration of the Palm Oil Mill,” in 8th International Seminar of Industrial Engineering and Management, ISIEM 2015, Malang, Indonesia, Jakarta: ISIEM, 2015. pp. QM-21-25.
M. Hudori, “Pengukuran Kualitas Pemanenan Tandang Buah Segar (TBS) Kelapa Sawit Sebagai Bahan Baku Pabrik Kelapa Sawit (PKS),” Industrial Engineering Journal (IEJ), vol. 7, no. 2, pp. 1-7, 2019b.
A. Krisdiarto, L. Sutiarso dan K. Widodo, “Optimasi Kualitas Tandan Buah Segar Kelapa Sawit dalam Proses Panen-Angkut Menggunakan Model Dinamis,” Agritech, vol. 37, no. 1, pp. 101-107, 2017.
Indonesia, Kementerian Pertanian Republik Indonesia, Permentan No. 01/Permentan/KB.120/1/2018 tentang Pedoman Penetapan Harga Pembelian Tandan Buah Segar Kelapa Sawit Produksi Pekebun. Jakarta: Kementan. Available from Kementerian Pertanian, https://jdih.pertanian.go.id/fp/peraturan/detail/850. [Accessed: Dec. 18, 2022].
Published
How to Cite
Issue
Section
Copyright (c) 2023 Jurnal Sistem Teknik Industri
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to TALENTA Publisher Universitas Sumatera Utara as the publisher of the journal.
Copyright encompasses the rights to reproduce and deliver the article in all forms and media. The reproduction of any part of this journal, its storage in databases, and its transmission by any form or medium will be allowed.
