Implementation of 5S in Improving of Palm Oil Mill Working Environment
DOI:
https://doi.org/10.32734/jsti.v25i1.8641Keywords:
Palm Oil, Fishbone, Seiri, Seiton, Seiso, Seiketsu, ShitsukeAbstract
A work environment describes a place for employees affect them to do their tasks. A good work environment will certainly make employees do and spend all their energy and mind to work optimally. A comfortable feeling of the work environment can reduce boredom at work. This comfort feelings have an impact on increasing motivation and producing employee job satisfaction. The condition of the working environment in palm oil industry is currently classified as messy where there are still some tools scattered on the factory floor, there is mud and slippery puddles in various places such as floors or stairs. Conditions like this certainly need to be repaired immediately to avoid the risk of work accidents and increase employees' comfortable. Improvement of working environment conditions can be done by various methods, one of the methods is 5S method. 5S spelling as (Seiri, Seiton, Seiso, Seiketsu, Shitsuke) is one of the effective tool in management to improve the work culture of workers and the conditions of the work environment in a factory. Based on the evaluation results, the evaluation categories of 5S implementations are Seiri of 16 score, Seiton of 16 score, Seiso of 9 score, Seiketsu of 8 score, Shitsuke of 7 score. The results of this total score show the 5S value of palm oil mill is in the average score of 56 total score.
Downloads
References
I. Rizkya, R. M. Sari, K. Syahputri, and N. Fadhilah, “Implementation of 5S methodology in warehouse: A case study,†IOP Conf Ser Mater Sci Eng, vol. 1122, no. 1, p. 012063, Mar. 2021, doi: 10.1088/1757-899x/1122/1/012063.
R. Tea, S. Jamhari, P. Studi Manajemen Keselamatan Transportasi Jalan, P. Studi Manajemen Keselamatan Transportasi Jalan Politeknik Keselamatan Transportasi Jalan Jl Semeru No, and K. Tegal, “Evaluasi Penerapan Seiri, Seiton, Seiso, Seiketsu, dan Shitsuke (5S) pada Departemen Transportasi PT. Prasadha Pamunah Limbah Industri Bogor,†Tegal, 2019.
I. Rizkya, N. Hidayati, R. M. Sari, and U. Tarigan, “Evaluation of the Leading Work Culture 5S in Industry,†in IOP Conference Series: Materials Science and Engineering, Oct. 2019, vol. 648, no. 1. doi: 10.1088/1757-899X/648/1/012003.
H. Murnawan, “Perencanaan Produktivitas Kerja dari Hasil Evaluasi Produktivitas dengan Metode Fishbone di Perusahaan Percetakan Kemasan PT.X,†Jurnal Teknik Industri HEURISTIC, vol. 11, no. 1, 2014.
Q. S. Aruan and M. Fakhri, “Pengaruh Lingkungan Kerja Terhadap Kepuasan Kerja Karyawan Lapangan Departemen Grasberg Power Distribution PT.Freeport Indonesia,†MODUS, vol. 27, no. 2, pp. 141–162, 2015.
I. Rizkya, K. Syahputri, R. M. Sari, and I. Siregar, “5S Implementation in Welding Workshop-A Lean Tool in Waste Minimization,†in IOP Conference Series: Materials Science and Engineering, Jul. 2019, vol. 505, no. 1. doi: 10.1088/1757-899X/505/1/012018.
F. Hamidy, “Pendekatan Analisis Fishbone untuk Mengukur Kinerja Proses Bisnis Informasi E-Koperasi,†Bandarlampung, 2016. [Online]. Available: https://servicelink.pinnacol.com/pinnacol_docs/lp/
D. Rachmat and A. Y. Darma, “Tingkat Korelasi Budaya Organisasi Dan Kinerja Karyawan (Studi Pabrik Kelapa Sawit PT. Smart.Tbk),†Jurnal Vokasi Teknologi Industri, vol. 2, no. 1, pp. 1–11, 2020.
R. Siahaan and B. H. Tambunan, “Pengaruh Lingkungan Kerja dan Budaya Organisasi Terhadap Kinerja (Studi pada Koperasi CU Mandiri Tebing Tinggi),†Jurnal Stindo Profesional, vol. VII, no. 1, 2021.
H. Stephanie, N. Tinaprilla, and D. A. Rifin, “Efisiensi Pabrik Kelapa Sawit di Indonesia,†Jurnal Agribisnis Indonesia, vol. 6, no. 1, pp. 27–36, 2018, [Online]. Available: http://journal.ipb.ac.id/index.php/jagbi
A. Syahuri Zein, “Analisis Produksi Sawit Di Sumatera Barat,†Jurnal Ilmu Ekonomi dan Keislaman, vol. 7, pp. 320–336, 2019.
P. Nurfathiyah and Rendra, “Penyuluhan Tentang Peremajaan Kelapa Sawit Dan Kelembagaan Petani Di Kecamatan Sungai Bahar Kabupaten Muaro Jambi,†Jurnal Karya Abdi Masyarakat, vol. 3, no. 1, pp. 1–9, 2019.
A. Desrianty, “Usulan Perbaikan Berdasarkan Metode 5S (Seri, Seiton, Seiso, Seiketsu, dan Shitsuke) Untuk Area Kerja Lantai Produksi Di PT.X.†Jurnal Online Institut Teknologi Nasional, vol. 3, no 4,pp. 219-229, 2015.
Published
How to Cite
Issue
Section
Copyright (c) 2023 Jurnal Sistem Teknik Industri
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to TALENTA Publisher Universitas Sumatera Utara as the publisher of the journal.
Copyright encompasses the rights to reproduce and deliver the article in all forms and media. The reproduction of any part of this journal, its storage in databases, and its transmission by any form or medium will be allowed.
