Evaluasi Aktivitas Manual Material Handling Dengan Menggunakan Metode Biomekanika Kerja Pada Pengangkatan Thiner di Bagian Warehouse

Ade Andhika Saputra; Wahyudin; Asep Erik Nugraha

doi:10.32734/jsti.v23i2.6273

Authors

Ade Andhika Saputra Universitas Singaperbangsa Karawang
Wahyudin Universitas Singaperbangsa Karawang
Asep Erik Nugraha Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.32734/jsti.v23i2.6273

Keywords:

Biomekanika Kerja, Manual Material Handling, Musculoskeletal

Abstract

In doing a job manually such as moving, lifting a certain material needs to be evaluated to minimize the risk of work accidents. The research that will be conducted is the evaluation of manual material handling on the removal and removal of thiners. The purpose of this study was to determine the application of work biomechanics in minimizing the risk of spinal cord injury and providing improvement in work activities. The methods used in this research are Nordic Body Map, NIOSH, Rapid Entire Body Assessment, L5 / S1 (Fc) Force and Energy Consumptions. The results of this study were found that several parts of the workers' body muscles were injured, such as the neck, left and right shoulders, arms and wrists, back and waist. The RWL and Li values after repairs where is RWL exceeded the Load Constant value of 20 kg, and the Li value <1 (no risk). Then the work category level which was originally light-moderate work changed to light work. Furthermore, the original REBA score got a score of 5 to 3 (level 1). And the results of the compressive force against L5 / S1 have values of Fc <AL and Fc < MPL.

Downloads

Download data is not yet available.

References

D. B. A. A. G. B. J. Chaffin, Occupational Biomechanics, USA: John Wiley and Sons, 1991.

S. H. L. S. Tarwaka, Ergonomi untuk Keselamatan Kerja dan Produktivitas, Surakarta: Harapan Press, 2004.

J. Westland, The Project Management Life Cycle, America: Kogan Page, 2006.

R. Lueder, A Proposed RULA for Computer Users, Procceding of the Ergonomic Summer Workshop, San Fransisco, 1996.

E. Granjeand, Fitting the Task to The Man, 4 ed., T. &. F. Inc, Ed., London, 1993.

A. E. N. H. W. Kusnadi, "ANALISA PENERAPAN LEAN WAREHOUSE DAN 5S+ SAFETY DI GUDANG PT. NICHIRIN INDONESIA," Jurnal Media Teknik dan Sistem Industri , pp. 1-13, 2018.

A. P. A. P. K. A. Dene Herwanto, "PERBAIKAN WORKSTATION DI PT. YUSHIRO INDONESIA UNTUK MENGURANGI RESIKO KELUHAN MUSKULOSKELETAL," Jurnal Teknologi, pp. 71-76, 2016.

E. Nurmianto, Ergonomi Konsep Dasar Dan Aplikasinya, Surabaya: Guna Widya, 2008.

I. W. L. W. D. N. 2. Sukania, Identifikasi Keluhan Biomekanik dan Kebutuhan Operator Proses Packing di PT X, Jakarta: Program Studi Teknik Industri Universitas tarumanagara Jakarta, 2013.

V. Peter, "Musculoskeletal Disorder," 4 Maret 2000. [Online]. Available: http://www.csao.org/uploadfiles/magazine/Vol.13 No 3/musculo.htm..

I. Sutalaksana, Teknik Perancangan Sistem Kerja, Bandung: Laboratorium Tata Teknik Industri- ITB, 2006.

F. Tayyari, Occupational Ergonomics, London: Chapman and Hall, 1997.

A. a. B. A. Bagchee, Biomechanical Aspect of Body Movement. In Occupational Ergonimcs. Theory and Apllication, New York: Marcel Dekker, Inc, 1996.

P. O. a. R. K. 1. Astrand, Textbook of Work Physiology-Physiological Bases of Exercise, Neuromuscular Function. 2nd Edition, New York: McGraw-Hill Book Company, 1977.

S. d. C. V. M. Snook, "The Design of Manual Handling Tasks: Revised Table of Maximum Acceptable Weights and Forces.," pp. 1197-1213, 1991.