Mengukur Potensi Bahaya dan Resiko Kecelakaan Kerja dengan Metode Hazard and Operabillity Study pada Aktivitas Maintenance

Authors

  • Dede Universitas Singaperbangsa Karawang
  • winarno Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.32734/jsti.v23i2.6202

Keywords:

Hazard Identification, Risk Assesment, Risk Matrix, HAZOP Method, Maintenance

Abstract

Work accidents are things that must be avoided, so that's not inflicted loss on the company and the workers. However, several workers still not pay attention to occupational health and safety regulations and in the work area still found several potential hazards. The research is conducted at PT Pindo Deli Pulp and Paper Mills Indonesia in Karawang Regency and focuses on preventive and corrective maintenance activities that prevent paper machine breakdown. The purpose of this study is to measure how big the potential hazard and impact by using Hazard and Operability Study (HAZOP) method. This method is a systematic study, which aims to find the factors that causing work accidents and find out how big the potential accidents and their impacts. The data is collected by distributing questionnaires to the employee. The results show that hazards caused by the work area and the workers themselves are 18% and 82%, respectively. Based on the severity, the number of extreme, high, medium and low risk hazards are 1, 8, 1 and 1, respectively.

Downloads

Download data is not yet available.

References

Undang-Undang Republik Indonesia No. 13 Tahun 2003, “Undang-Undang Republik Indonesia No.13 Tahun 2003 tentang Ketenagakerjaan,” Undang-Undang, 2003. http://www.kemenperin.go.id/kompetensi/UU_13_2003.pdf.

B. N. Pujiono, I. P. Tama, and R. Y. Efranto, “ANALISIS POTENSI BAHAYA SERTA REKOMENDASI PERBAIKAN DENGAN METODE HAZARD AND OPERABILITY STUDY (HAZOP) MELALUI PERANGKINGAN OHS RISK ASSESSMENT AND CONTROL (Studi Kasus: Area PM-1 PT. Ekamas Fortuna),” J. Rekayasa dan Manaj. Sist. Ind., vol. 1, no. 2, pp. 253-263, 2013.

D. P. Restuputri, R. Prima, and D. Sari, “ANALISIS KECELAKAAN KERJA DENGAN MENGGUNAKAN METODE HAZARD AND OPERABILITY STUDY ( HAZOP ),” pp. 24–35, 2015.

H. Mamduh M, “Risiko, Proses Manajemen Risiko, dan Enterprise Risk Management,” in Management Research Review, 2014, pp. 1–40, 2014.

E. Widyawati, PENERAPAN KESELAMATAN KERJA DAN PENCEGAHAN PENYAKIT AKIBAT KERJA PADA PERAWAT DI RUMAH SAKIT. 2020.

Y. Oktriyawan, H. Purnomo, dan N. Oktyajati, “Analisis Pemakaian Alat Pelindung Diri pada Tenaga Kerja Antar-Shift Kerja di Unit Produksi PT. XYZ sebagai Upaya Mengendalikan Risiko di Tempat Kerja”, GIJTSI, vol. 2, no. 01, hlm. 50–59, Jul 2021.

S. P. Aprilia, B. Suhardi, and R. D. Astuti, “Analisis Risiko Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard and Operability Study (HAZOP) : Studi Kasus PT. Nusa Palapa Gemilang,” Performa Media Ilm. Tek. Ind., vol. 19, no. 1, pp. 1–8, 2020.

E. Jamilah, Y. H. Yadi, and A. Umyati, “Identifikasi Potensi Bahaya Dengan Metode Hazard And Operability Study ( HAZOP ) Di Area Boiler PT . XYZ,” J. Tek. Ind. Univ. Ageng Tirtayasa, 2013.

M. Nur, “Analisis Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard And Operability Study ( HAZOP ) Di PT . XYZ,” vol. 4, no. 2, pp. 133–138, 2018.

A. Haslindah, I. Idrus, Y. Pongsimpin, and R. Budicalista, “ANALISIS RESIKO BAHAYA PRODUKSI BERDASARKAN FAKTOR LINGKUNGAN KERJAMENGGUNAKAN METODE HAZARD AND OPERABILITY ( HAZOP ).,” vol. 14, no. April, pp. 1–4, 2019.

E. Ditya, Y. Savitri, S. Lestariningsih, and I. Mindhayani, “Analisis Keselamatan Dan Kesehatan Kerja ( K3 ) Dengan Metode Hazard And Operability Study ( HAZOP ) ( Studi Kasus : CV . Bina Karya Utama ),” vol. 3, no. 1, pp. 51–61, 2021.

Published

2021-07-28

How to Cite

Dede, & winarno. (2021). Mengukur Potensi Bahaya dan Resiko Kecelakaan Kerja dengan Metode Hazard and Operabillity Study pada Aktivitas Maintenance. Jurnal Sistem Teknik Industri, 23(2), 121-131. https://doi.org/10.32734/jsti.v23i2.6202