Implementation of Lean Manufacturing Methodology and Its Application: A Literature Review
DOI:
https://doi.org/10.32734/jsti.v26i1.12158Keywords:
Lean Manufacturing, Literature Review, Waste ReductionAbstract
This study aims to investigate and analyze several previous works of relevant literature on the Lean Manufacturing technique in international journals. The methodology used to review the previous studies was carried out through a survey based on descriptive, qualitative, and bibliographical surveys in International Journal with restriction to the period of publication from 2017 – 2022 published on databases and electronic journals in English with the scope to examine and analyze in-depth the extent to which literature used to discuss results in the selected papers of applying the Lean Manufacturing technique in several case studies. After conducting a survey, only thirty-three articles were found with the theme of the application of Lean Manufacturing and its technique in manufacturing companies. Twenty-one techniques/tools of Lean Manufacturing were found problem-solving for waste time elimination, reducing process cycle times, and implementing process improvement. It is concluded that the most used methodology in waste reduction is Value Stream Mapping.
Downloads
References
N. Y. G. Lai et al., “Understanding Learning Intention Complexities in Lean Manufacturing Training for Innovation on the Production Floor,” Journal of Open Innovation: Technology, Market, and Complexity, vol. 8, no. 3, Sep. 2022, doi: 10.3390/joitmc8030110.
D. Guzel and A. S. Asiabi, “Increasing Productivity of Furniture Factory with Lean Manufacturing Techniques (Case Study),” Tehnicki Glasnik, vol. 16, no. 1, pp. 82–92, Feb. 2022, doi: 10.31803/tg-20211010121240.
J. Yudhatama and I. M. Hakim, “Truck Assembly Line Reconfiguration to Reduce Cycle Time with Lean Manufacturing Approach in the Indonesian Automotive Industry,” in IOP Conference Series: Materials Science and Engineering, IOP Publishing Ltd, Dec. 2020. doi: 10.1088/1757-899X/1003/1/012101.
M. Z. P. Nugroho, S. Hasibuan, and H. Adiyatna, “Application of lean manufacturing to improve procurement lead time in the case of the steel industry,” in IOP Conference Series: Materials Science and Engineering, IOP Publishing Ltd, Jan. 2021. doi: 10.1088/1757-899X/1010/1/012022.
G. Saleem, “Impact of Lean Manufacturing on Organizational Performance through a Moderating Role of ERP,” South Asian Management Review, pp. 51–65, Oct. 2022, doi: 10.57044/samr.2022.1.2.2212.
S. Parthasarathi, P. M. K., K. J., M. L., P. Vellingiri G., and R. C. S., “Productivity Improvement and Reduction of Lead Time in Manufacturing Industry Using Lean Tools,” Industrial Engineering, vol. 5, no. 1, p. 1, 2021, doi: 10.11648/j.ie.20210501.11.
M. Ramadan, B. Salah, M. Othman, and A. A. Ayubali, “Industry 4.0-based real-time scheduling and dispatching in lean manufacturing systems,” Sustainability (Switzerland), vol. 12, no. 6, Mar. 2020, doi: 10.3390/su12062272.
V. Sosa-Perez, J. Palomino-Moya, C. Leon-Chavarri, C. Raymundo-Ibañez, and F. Dominguez, “Lean Manufacturing Production Management Model focused on Worker Empowerment aimed at increasing Production Efficiency in the textile sector,” in IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, Apr. 2020. doi: 10.1088/1757-899X/796/1/012024.
V. Tripathi, S. Chattopadhyaya, A. K. Mukhopadhyay, S. Sharma, C. Li, and G. Di Bona, “A Sustainable Methodology Using Lean and Smart Manufacturing for the Cleaner Production of Shop Floor Management in Industry 4.0,” Mathematics, vol. 10, no. 3, Feb. 2022, doi: 10.3390/math10030347.
C. Maware and O. Adetunji, “Lean manufacturing implementation in Zimbabwean industries: Impact on operational performance,” International Journal of Engineering Business Management, vol. 11, Jun. 2019, doi: 10.1177/1847979019859790.
P. K. Chen, J. Fortuny-Santos, I. Lujan, and P. Ruiz-de-Arbulo-López, “Sustainable manufacturing: Exploring antecedents and influence of Total Productive Maintenance and lean manufacturing,” Advances in Mechanical Engineering, vol. 11, no. 11, Nov. 2019, doi: 10.1177/1687814019889736.
C. Y. Huang, D. Lee, S. C. Chen, and W. Tang, “A Lean Manufacturing Progress Model and Implementation for SMEs in the Metal Products Industry,” Processes, vol. 10, no. 5, May 2022, doi: 10.3390/pr10050835.
L. Gaikwad and V. Sunnapwar, “The Role of Lean Manufacturing Practices in Greener Production: A Way to Reach Sustainability,” International Journal of Industrial and Manufacturing Systems Engineering, vol. 5, no. 1, p. 1, 2020, doi: 10.11648/j.ijimse.20200501.11.
S. Saetta and V. Caldarelli, “Lean production as a tool for green production: The Green Foundry case study,” in Procedia Manufacturing, Elsevier B.V., 2020, pp. 498–502. doi: 10.1016/j.promfg.2020.02.042.
G. Garcia-Garcia, Y. Singh, and S. Jagtap, “Optimising Changeover through Lean-Manufacturing Principles: A Case Study in a Food Factory,” Sustainability (Switzerland), vol. 14, no. 14, Jul. 2022, doi: 10.3390/su14148279.
B. Byrne, O. McDermott, and J. Noonan, “Applying lean six sigma methodology to a pharmaceutical manufacturing facility: A case study,” Processes, vol. 9, no. 3, Mar. 2021, doi: 10.3390/pr9030550.
K. Ismail, C. R. Isa, and L. Mia, “Market competition, lean manufacturing practices and the role of Management Accounting Systems (MAS) information,” Jurnal Pengurusan, vol. 52, pp. 47–61, Jun. 2018, doi: 10.17576/pengurusan-2018-52-04.
Z. Nihlah and T. Immawan, “Lean Manufacturing: Waste Reduction Using Value Stream Mapping”, doi: 10.1051/e3sconf/2018730.
M. Brito, A. L. Ramos, P. Carneiro, and M. A. Gonçalves, “Integration of lean manufacturing and ergonomics in a metallurgical industry,” International Journal of Occupational and Environmental Safety, vol. 2, no. 2, pp. 21–31, Oct. 2018, doi: 10.24840/2184-0954_002.002_0003.
P. Basu, I. Ghosh, and P. K. Dan, “Using structural equation modelling to integrate human resources with internal practices for lean manufacturing implementation,” Management Science Letters, vol. 8, no. 1, pp. 51–68, 2018, doi: 10.5267/j.msl.2017.10.001.
C. P. Carvalho, D. S. Carvalho, and M. B. Silva, “Value stream mapping as a lean manufacturing tool: A new account approach for cost saving in a textile company,” International Journal of Production Management and Engineering, vol. 7, no. 1, p. 1, Jan. 2019, doi: 10.4995/ijpme.2019.8607.
M. T. Tariku, “The Effect of Lean Manufacturing Tools on Waste Reduction at Arjo Didessa Sugar Factory,” vol. 8, no. 4, 2018, [Online]. Available: www.iiste.org
A. Qattawi and S. Chalil Madathil, “Assembly line design using a hybrid approach of lean manufacturing and balancing models,” Prod Manuf Res, vol. 7, no. 1, pp. 125–142, Jan. 2019, doi: 10.1080/21693277.2019.1604274.
Y. Klochkov, A. Gazizulina, and K. Muralidharan, “Lean six sigma for sustainable business practices: A case study and standardisation,” International Journal for Quality Research, vol. 13, no. 1, pp. 47–74, 2019, doi: 10.24874/IJQR13.01-04.
A. L. Gazoli de Oliveira and W. R. da Rocha Junior, “Productivity improvement through the implementation of lean manufacturing in a medium-sized furniture industry: A case study,” South African Journal of Industrial Engineering, vol. 30, no. 4, pp. 172–188, Dec. 2019, doi: 10.7166/30-4-2112.
J. L. G. Alcaraz, F. A. M. Hernández, J. E. O. Tiznado, A. R. Vargas, E. J. Macías, and C. J. Lardies, “Effect of quality lean manufacturing tools on commercial benefits gained by mexican maquiladoras,” Mathematics, vol. 9, no. 9, May 2021, doi: 10.3390/math9090971.
E. #1, M. Hlyal, J. El, and A. #3 #, “Lean Manufacturing and Six Sigma Critical Success Factors: A Case Study of the Moroccan Aeronautic Industry,” 2020. [Online]. Available: http://excelingtech.co.uk/
G. Nawanir, K. Teong Lim, K. Loon Lee, T. Durojaye Moshood, and A. Nur Aizat Ahmad, “Less for More: The Structural Effects of Lean Manufacturing Practices on Sustainability of Manufacturing SMEs in Malaysia,” 2020. [Online]. Available: http://excelingtech.co.uk/
S. Sadiq, M. S. Amjad, M. Z. Rafique, S. Hussain, U. Yasmeen, and M. A. Khan, “An integrated framework for lean manufacturing in relation with blue ocean manufacturing - A case study,” J Clean Prod, vol. 279, Jan. 2021, doi: 10.1016/j.jclepro.2020.123790.
A. Colim et al., “Lean manufacturing and ergonomics integration: Defining productivity and wellbeing indicators in a human–robot workstation,” Sustainability (Switzerland), vol. 13, no. 4, pp. 1–21, Feb. 2021, doi: 10.3390/su13041931.
F. Abu, H. Gholami, M. Z. M. Saman, N. Zakuan, D. Streimikiene, and G. L. Kyriakopoulos, “An sem approach for the barrier analysis in lean implementation in manufacturing industries,” Sustainability (Switzerland), vol. 13, no. 4, pp. 1–18, Feb. 2021, doi: 10.3390/su13041978.
M. Moghadam Arjmand, M. Rahiminezhad Galankashi, and S. Ahmad Helmi, “Leanness Assessment in an Auto Parts Manufacturer.”
M. Ly and Q. N. Kieu Viet, “Improvement Productivity and Quality by Using Lean Six Sigma: A Case Study in Mechanical Manufacturing,” International Research Journal on Advanced Science Hub, vol. 4, no. 11, pp. 251–266, Nov. 2022, doi: 10.47392/irjash.2022.066.
A. Y. Tobe, D. Widhiyynuriyawan and L. Yuliati, “The Integration of Overall Equipment Effectiveness (OEE) Method and Lean Manufacturing Concept to Improve Production Performance (Case Study: Fertilizer Producer),” Journal of Engineering and Management Industrial System Vol. 5 No. 2 Year 2017, e-ISSN 2477-6025 DOI 10.21776.
G. Jimenez, G. Santos, J. Carlos Sa, S. Ricardo, J. Pulido, A. Pizarro and H. Hernandez, “Improvement of Productivity and Quality in the Value Chain through Lean Manufacturing – A Case Study,” Procedia Manufacturing 41 (2019).
Published
How to Cite
Issue
Section
Copyright (c) 2024 TALENTA Publisher Universitas Sumatera Utara
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to TALENTA Publisher Universitas Sumatera Utara as the publisher of the journal.
Copyright encompasses the rights to reproduce and deliver the article in all forms and media. The reproduction of any part of this journal, its storage in databases, and its transmission by any form or medium will be allowed.
